I meant to share my latest creation with you guys for a while now.
I have my son with me basically 24/7 since he was 6 months old so where before I got around on the 4 wheeler now I have to use the Zuki. He comes with me to work and mid week goat culling missions too (just the easy spots). He just sits in the babypack with his earmuffs on and tries he's best to to slow me down by grabbing all the branches of trees we walk past or singing twinkle-twinkle just to make shooting a bit more challenging . One day we shot 16 dog tucker goats on a neighbors farm which was good news for the mutts bad for me as I had to take all the carcasses off the pasture. So had to load them in the truck making a bloody mess of the inside. It was stinking for weeks.
Than I decided to make a rear carrier, my mate used to have one on his old UAZ and it was really useful.
So pulled out all the use full bits from the scrap metal pile and started cutting and welding.
Made a frame and the bottom bit its going to swing on:
Attachment 54873
Attachment 54874
Than glued the mount to the tow bar which is bolted on the chassis so its Warrant of fitnessy
This is where the bottom bit slides in and held there by 2 bolts, pull the bolts out and the whole thing comes of if not needed.
Attachment 54875
Heated up 4 10mm bars in the forge and bent them so the bottom will have a belly and welded on 2 lines of cross bars and made a set of hinges.
Attachment 54876
Its certified up to 5.2 goats carrying capacity. Still working on a better way of anchoring the straps.
Patent pending :D .
Attachment 54877
Attachment 54878
Attachment 54879
Attachment 54880
