now i was of the opinion that all these wet tumblers are to small for the money so i turned this
Printable View
now i was of the opinion that all these wet tumblers are to small for the money so i turned this
Where did you get your media?
That seems to be the most expensive part at the moment.
hey deye223 any chance of a parts list? I am stuck with one of the hobby tumblers at the mo. This looks like a good project!
I hear what your saying deye223.
Asked a guy at a Queensland gun shop "Can I see that rifle over there?"
He said yep, You got a gun licence?
Sure have I said and handed over my NZ licence.
He said sorry mate I can't give it to you to hold, you'll just have to look at it from there. :(
Pretty sad really.
Cheers
Pete
yep that ain't the worst of it either
try and defend yourself and you get charged
get your guns stolen get charged yep what a system charge the victim :wtfsmilie:
Yeah the first one rings true here too mate, don't you worry.
oh well on a brighter note :ORLY: i pulled it apart and painted it looks good too.
$140 for the drum if you made it out of ordinary down pipe that would be around $50 - $60
now the base
MOTOR........$95 Electric Motor Single Phase 240V 0 25KW 1 3HP 1400rpm | eBay
RHS...............$25
SHAFT...........$17 THIS IS BRITE STEEL
BEARINGS.....$36
PULLEYS........$35
NUT&BOLTS..$8
V BELT...........$12
TOTAL...........$228 and the other total with 10lb of pins and my drum ready to spin $498 but with ordinary down pipe $408
now considering the thumler (15lb) and the rebel 17 (17) are both around $520 to your door and there to bloody small
i think this is the way to go mine (45lb)
(..) = weight capacity including water
and the pic is whats inside the drum
cheers D
glen the ID is 142mm and the OD is 160mm it's pvc presure pipe and a lot thicker than down pipe
cheers D