I got tired of using gas and a drill, and found it a bit inconsistent when the bottle got a bit light etc I thought an induction system would be the way forward.
So I did a fair bit of research and came across many interesting articles, a couple of good ones were from guys on this forum that have built them as well.
I contacted them and they were very helpful.
For the genuine novice with very little electrical theory its a big ask to get it all together without burning out a few designs, so I would suggest you need at least a rudimentary understanding to start with and there is a lot to learn.
One big thing I did learn is that there is good reason for the cost of a professional build, if my time wasn't free to me I would have been better off buying a machine!
But there is the "give it a crack Nige " in me that persists with whatever I do.
So without further ado here is a short video of what I built.
https://youtu.be/OWCCmxymlRU
