Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Ammo Direct Gunworks


User Tag List

Results 1 to 15 of 30
Like Tree21Likes

Thread: duracoat experiences

Threaded View

  1. #16
    Member Wingman's Avatar
    Join Date
    Aug 2018
    Location
    Waikato
    Posts
    2,034
    I have seen the same thing on a couple of mates rifles,
    Some Ceracoat peeling off in flakes, and some so thin it rubbed through in weeks.. this comes down to bad prep and application not the product itself.
    With that said it is a VERY thin coating just the nature of that product. Personally I think painting it on the inside of actions and on moving surfaces like bolts is a mistake no matter what they claim (makes it slicker, holds lube etc).
    I have had to clean out more than one action internally due to binding from flaking off Ceraracoat.
    Dont do it. Those areas should be masked of and other metal coatings used if there is problematic bare metal. There are lots of companies that use Ceracoat on their new rifles and you will notice the dont spray they inside of actions. Things like magazines with constant rub points can also wear Ceracoat off prematurely.
    Ceracoats other Achilles is its adhesion to polymers/plastic. Thae nature of it as a ceramic coat means that it has to be baked quite hot to get to its final hardend tough state which can be disastrous for some plastic parts. It can be done at a lower heat for longer but it doesnt reach the same hardness as it would on metal baked hotter so therefore wears off quicker.


    I I had to pick a favorite Id go with Duracoat every time. It is easier to build up thicker if needed and can be touched up easy if it takes a bad hit. It can be baked to speed up curing but it will reach maximum hardness even without baking if you give it the time it requires to properly cure. Leaving parts in the sun helps too.

    Let me dig out a spec sheet and Ill post a pic of it for more info in regards to application and durability claims.

    Ill also drag out some rifles and show you some close ups of the wear of both products so you can make your own decisions.

    Just to be clear, I dont work for either company, I am speaking from my own person experience with both products, some of which have had the coatings applied by "professionals" and gun manufacturing companies and some by myself.
    jakewire likes this.

 

 

Similar Threads

  1. Duracoat/Milspec etc - where and how much
    By Gibo in forum Firearms, Optics and Accessories
    Replies: 63
    Last Post: 18-07-2017, 01:30 PM
  2. Diy duracoat
    By Jpayne in forum Projects and Home Builds
    Replies: 9
    Last Post: 11-10-2014, 05:46 PM
  3. Duracote / Duracoat
    By scottrods in forum Firearms, Optics and Accessories
    Replies: 1
    Last Post: 26-02-2012, 10:21 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!