Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

DPT Alpine


User Tag List

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 30
Like Tree93Likes

Thread: Lightweight 223 project

  1. #1
    Member
    Join Date
    May 2012
    Location
    Kaukapakapa
    Posts
    967

    Lightweight 223 project

    For quite a while I’ve wanted to make a lightweight 223.
    With budgets never extending to a beautiful stock from one of the carbon stock guru’s like the late Ken.

    I’ve had a lot to do with composites through boat building and a common product has always tweaked my interest. PET foam core. It’s what high speed racing yachts are made from and forms a core in many composite constructions. It shapes easily and is incredibly light. The joy is that it shapes very easily with 40grit sandpaper yet is super strong.

    One reservation however was always how to do the inletting? This is where I was excited to stumble across https://www.vtp.co.nz/

    A quick call and VTP was printing a core for a Howa mini. Amazing service too!

    Name:  09AF7118-BCA8-4BBF-9E82-87C5EF48A455.jpeg
Views: 996
Size:  204.3 KB

    Here’s a couple of progress shots. I intend to do the first one in fiberglass to see how it goes, then I’ll switch to carbon for the next.

    Name:  15B37039-C0A7-422F-9D98-5037E593279C.jpeg
Views: 1176
Size:  2.84 MB

    Name:  57FB9E00-5CB5-4994-B933-B98632D23DB5.jpeg
Views: 1169
Size:  2.40 MB

  2. #2
    Unapologetic gun slut dannyb's Avatar
    Join Date
    May 2018
    Location
    Oxford, North Canterbury
    Posts
    8,441
    #DANNYCENT

  3. #3
    Member
    Join Date
    May 2012
    Location
    Kaukapakapa
    Posts
    967
    Weight includes suppressor but hasn’t been glassed yet. That’s the next step
    dannyb likes this.

  4. #4
    Member
    Join Date
    Mar 2018
    Location
    Darfield
    Posts
    361
    Cool project, will be watching with interest.
    I've been wanting to do something similar, I was thinking to try vacuum bag the glass on but not sure how it would go with all the curves. Where do you source your PET foam from?
    dannyb likes this.

  5. #5
    Member SixtyTen's Avatar
    Join Date
    Dec 2015
    Location
    Auckland
    Posts
    477
    Thats an awesome idea to use the 3d printed inletting block, the howa minis are perfect for this type of project.

    I have thought about doing a similar thing but using super high density closed cell foam for the inletting area, but undercut from the action a reasonable amount (5-6mm) with lighweight foam for the forend and stock like you have done, then sheath the whole thing in carbon and use a milled fiber/silica filled epoxy to bed the action.

    Why not go straight to carbon for the first one? Cloth for a project like this would only be $50-60 tops.

    What is your plan for laminating? I have tried wet laminating stocks in the past with no vacuum and it is very tricky to get good consolidation around the tight corners. If I were to try it again, I would certainly use vacuum.

    Ill be watching your project with interest.
    Freezer and dannyb like this.

  6. #6
    Member
    Join Date
    May 2012
    Location
    Kaukapakapa
    Posts
    967
    Quote Originally Posted by SixtyTen View Post
    Thats an awesome idea to use the 3d printed inletting block, the howa minis are perfect for this type of project.

    I have thought about doing a similar thing but using super high density closed cell foam for the inletting area, but undercut from the action a reasonable amount (5-6mm) with lighweight foam for the forend and stock like you have done, then sheath the whole thing in carbon and use a milled fiber/silica filled epoxy to bed the action.

    Why not go straight to carbon for the first one? Cloth for a project like this would only be $50-60 tops.

    What is your plan for laminating? I have tried wet laminating stocks in the past with no vacuum and it is very tricky to get good consolidation around the tight corners. If I were to try it again, I would certainly use vacuum.

    Ill be watching your project with interest.
    Hey @SixtyTen

    Thanks for the interest.

    Although I agree that you could do this with inletting a foam/resin core, the joy of a 3D print is that it is accurate, stable and very light weight.

    Fiberglass I’m interested in using as it’s easier to layup and I can add layers in areas that need it and leave it thin where it’s not required. A multiple layer 2oz and 1oz laminate using epoxy will be super strong. Easily strong enough for my needs.

    It’s fast to get the foam shaped and the 3d core is inexpensive so I plan to try a couple of different ways of making it.

    I hope this gives others ideas to try the same

    If any Auckland members want PET foam core I have quite a bit left as you have to buy a full sheet at a minimum.
    veitnamcam, SixtyTen and dannyb like this.

  7. #7
    Member Flyblown's Avatar
    Join Date
    Feb 2018
    Location
    Waikato
    Posts
    3,212
    Very clever and cool stuff, great innovation. Keep the updates coming pls.

    Just...say...the...word

  8. #8
    Member
    Join Date
    May 2012
    Location
    Kaukapakapa
    Posts
    967
    Little update here, it’s glassed , phew!
    Name:  CA0C6DC9-8B55-4D69-B39E-618CCF21C0A3.jpeg
Views: 921
Size:  3.61 MB

    And with a sand and a spray of primer, it’s ready to fill pin holes
    Name:  5766E6E9-8238-4891-AEDA-DDDC0D855AA4.jpeg
Views: 933
Size:  2.85 MB

    380g which I’m pretty stoked with.
    Jandal recoil pad to come

  9. #9
    Unapologetic gun slut dannyb's Avatar
    Join Date
    May 2018
    Location
    Oxford, North Canterbury
    Posts
    8,441
    Looking good, did you use a mould at all or is it just shaped by hand and simply layed on ? Did you use vac bag ? Much nicer looking fore than the factory stock.
    #DANNYCENT

  10. #10
    Member
    Join Date
    May 2012
    Location
    Kaukapakapa
    Posts
    967
    Thanks @dannyb

    Cut with bandsaw,Shaped by hand with sureform and 40grit, but templated off a model 7 stock I had.
    No mould, no vac bag, just hand laid.
    dannyb likes this.

  11. #11
    Member
    Join Date
    May 2012
    Location
    Kaukapakapa
    Posts
    967
    2kg

    Name:  F71C072C-C5DF-43C1-93A0-0B353847DAF7.jpeg
Views: 715
Size:  1.72 MB
    Tahr, veitnamcam, Dreamer and 9 others like this.

  12. #12
    Unapologetic gun slut dannyb's Avatar
    Join Date
    May 2018
    Location
    Oxford, North Canterbury
    Posts
    8,441
    Quote Originally Posted by Freezer View Post
    Thanks @dannyb

    Cut with bandsaw,Shaped by hand with sureform and 40grit, but templated off a model 7 stock I had.
    No mould, no vac bag, just hand laid.
    shit hot that's just about rough enough for me to have a crack
    can you post a bit of a step by step of what you did and what products you used ?
    I have an idea of the shape stock I want to use and will get hopping on collecting the other bits needed.
    are you concerned it could snap where the foam core is bonded to the printed inlet ?
    can't wait to have a crack at this
    Joe_90 likes this.
    #DANNYCENT

  13. #13
    Member
    Join Date
    May 2012
    Location
    Kaukapakapa
    Posts
    967
    @dannyb, I’m happy to have a yarn on the phone if you are going to have a go.
    I don’t think the connection point will be at risk at all. It’s joint with internal tabs into the foam on the inside and fully glassed in on the outside. I’d be much more concerned of it cracking through the pistol grip. I added quite a bit more glass in this area but still think it could happen if I fell on it.
    dannyb likes this.

  14. #14
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    22,367
    interested in how you group with it...Ive found with my superlight crude stock I really have to concentrate on holding rifle firmly as apposed to getting away with murder as did beforehand.
    veitnamcam likes this.
    75/15/10 black powder matters

  15. #15
    Member
    Join Date
    Aug 2012
    Location
    helensville nz
    Posts
    4,366
    Quote Originally Posted by Micky Duck View Post
    interested in how you group with it...Ive found with my superlight crude stock I really have to concentrate on holding rifle firmly as apposed to getting away with murder as did beforehand.
    yeah i shoot @Freezer's rifles a bit doing load development and also checking zero if he is unable to make time (busy boy)
    his 270 feels like a toy to me with its stug carbon stock its only 3.4kg
    I'm used to verry heavy rifles my main hunting rifle is well over 5kg (heavy barrel howa with walnut stock)

    i find it a challenge to shoot the light rifles but have worked out that you cant baby them like you do with a heavy rifle
    i hold my personal rifle very lightly but with the 270 of freezers you really have to hold onto it and pull back into your shoulder to get it to shoot well really properly be in control almost man handle it

    its going to be a real challenge with this 223 currently only 2.7 with scope and can being a 223 will help but its still going to be "fun"
    Freezer and Micky Duck like this.

 

 

Similar Threads

  1. Wet day project
    By craigc in forum The Magazine
    Replies: 4
    Last Post: 24-02-2019, 09:34 PM
  2. the new project
    By northdude in forum Firearms, Optics and Accessories
    Replies: 8
    Last Post: 27-03-2016, 12:50 PM
  3. New Project
    By Freezer in forum Projects and Home Builds
    Replies: 32
    Last Post: 25-09-2012, 06:39 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!