Thread: Making a Sharps Barrel in my lathe.

Ok, The drill guide is mounted on my angle bracket and it sits in front of the 4 jaw chuck, but first the guide stub in set in the chuck true. The drill guide and bracket is set in front of the chuck with the stub in the guide and clamped . Guide is lined up on the stub and the two screws of the housing are set tight, now the drill guide is lined up on centre and locked on the angle bracket. The stub and angle bracket are removed and the barrel stock is set up in the lathe and the angle bracket is clamped back in front all lined up, and the seal stops the oil dribbles . Photo shoot, , Homebrew.357.