Thread: Making a Sharps Barrel in my lathe.

Hi guys, I feel a bit like Nasa, When after all the hard work men finally stood on the moon, witch means I have busted some primers in this rifle, so the firing pin is working, after some twigging and will have to bend the under lever up a bit so the breech block is a bit lower, pin hit is to high. This is the stage where you find out what's not working and start fixing your stuff ups. . Will have to shim were the barrel screws into the receiver buy 15/16" thou, It's this much out with a barrel flat at the top and breech block is a rubbing fit on barrel breech end only with a case in, bit of find sanding will fix for a nice tight head space. So it`s my clever way of fixing things up that will get this rifle going,Cheers, Homebrew.357., The first fired primers. , You have to look again. , Think of it as baby pic`s. , It`s my baby, oops could be the brew.