My projects last 12 months!

Since getting my fal I've managed to collect and tinker with a few rifles and shotguns, some more than others...

My first buy was a pretty humble little jw15 while I waited for my ar15 bits to show up, the action was as nasty as the trigger pull and the safety required 2 weeks of intense steroid treatment to opperate! Took to the thing with some 600 grit paper, grinding paste and 3 hours ofor opening, closing the bolt and pulling the trigger she's a different gun!
Well worth the $280 scoped and silenced from guncity if you're willing to put in a bit of work.

In the meantime my ar parts showed up courtesy of nzar15, trademe and a few other places,
It's an aero upper and lower, basic lower parts kit, TiN BCG, cqr stock extended out 40mm with a bigger buttplate and pad, changalang ambi charge handle with new roll pins, badger ordnance handgaurd, 20" trademe special barrel and my mate gave me a suppressor he'd made!
Putting it together was surprisingly easy and pretty rewardingAttachment 91377
Attachment 91379Attachment 91380


Next I picked up a ranger 870 tactical, and we'll the picture kind of explains it..I played too many video games clearly... then I got another because the stock on the other Hurt the mrs's shoulder too much so that's the only stock standard one I have!
Attachment 91378
Attachment 91381

Clays got tiring with an 18" barrel so I picked up a stoeger 3000, promptly lost the charging handle so turned up another.
Attachment 91382
Attachment 91376

Anyway that's my story..

Do you intend to fight for the lord(who ever that may be:ORLY:) with that suppressor?

Got the bug ay

My friend is a Christian armourer with a sense of humor hah, it's actually a pretty decent suppressor too

Not the rev is it

So how did you extnd the bupad on the Hera, are those custom bits or did you buy them from somewhere.

It's a bit of 3mm alloy cut and shaped to the same profile as the back of the stock and bolts into the factory holes, thence 2 new holes drilled in that and tapped m6 that hold the 2 little spindle things and the back plate is made from 5mm alum..rubber is just a chunk of set Silicon caulk sanded to shape.
I did it all athe work :)

Quote:

---

Originally Posted by Gloves

It's a bit of 3mm alloy cut and shaped to the same profile as the back of the stock and bolts into the factory holes, thence 2 new holes drilled in that and tapped m6 that hold the 2 little spindle things and the back plate is made from 5mm alum..rubber is just a chunk of set Silicon caulk sanded to shape.
I did it all athe work :)

---

Nice skills!