Thread: New Build

The scope mounts rings are brazed/welded to the base , so they cannot come off , and has recoil lug front and rear , the action has to have a small square taken out at the back , just as the old Mauser98 , ie so you can fit a 5rd srtipper clip into the slot , and at the front a very small 1/2 circle , like 6mm dia , so the bullet tip clears .
Clip slotted actions where in use as target rifles , and as such had iron aperture sights .
In this case they used 40x target actions , and made a scope mount to fit into this cutting & lock in place .

Cheers Chris