Thank guys
Printable View
Thank guys
Nice work, keen to see it finished
I hope I inspired you Toby. Good onya for having a crack.
Swedish Mauser 6.5 x 55. 1941 Husqvarna M38. DIY Re-build for a more modern look. - YouTube.
I take it you have seen this?
Didnt you use a chainsaw...lol;)
A tip: If you're putting a scope on which you probably will, raise the check rest as you will have better line of sight through your scope, most rifles don't have a raised check piece to suit the scope or to suit the shooter. Some rifles come with open sights and putting a scope on changes the hight of your sight by an inch or two. See mine for an idea.
If the knot is a dead knot in the butt (if you know what I mean) depending how loose it is might have to be glued in or once you seal the stock that should keep it in. Hopefully.
I ended up sealing mine with a two pot mix (Uracryl 404 +hardner), to protect it from the weather etc.
If you have any question about how I did mine, feel free to ask.
Looking good by the way!!:thumbsup:
Cheers.
Yeah that and neverreadyfreddys
cheers mate and good on you for taking the plunge, looking good.
Just noticed I wont get the router underneath to inlet the trigger gaurd/floor plate. Theres a mill at the old mans work I can use though I only saw drill bits in it. If I cut the bottom off a drill bit would it fine to use?
Thanks or the tips KC
You can try, I used chisels too to inlet trigger guard, I never used a router, only a chainsaw...lol
I had a chainsaw right there you see the blade in the pic. I cant say how many times I conpssidered picking it up to cut out the shape. dont think Im skilled enough to inlet with one
Take your time with it now as you don't want to fuk it up at the last minute.
Are you going to add checkering?
Yup. Will buy a kit after I get the action bedded incase I stuff it up before hand and get a kit for nothing
Did mine using a mill attachment ($100) I got for my drillpress . Also consider buying a dremel . Got mine quite late in the project and wish I got it sooner. You can do your own dentistry with it later.
Toby should buy an end mill and run on hi speed, you'll get the I letting for the trigger etc with that, there are different configurations, you'll need a fourlade cutter with end blades as well, you cannot use some tpyes as a drill, as they don't cut in the centre? Good looking workmanship :thumbsup:
Looking good Toby.:cool:
I still haven't found that round tuit I need to finish the kids stock for the 22
here's an update pic of this mornings work, also like to add I never used a router duplicator or anything so if it looks bung its cause I used a rasp to shape it and eye leveled everything.
Here's the main tools also used a belt sander a couple of times and the router to do the inletting thats been done
Attachment 20154
I glued on the grip cap so it can be shaved down with the rest of the grip from here. Will also add a blued screw in the center
Attachment 20155
Check rest seems to be high enough for me.
Attachment 20156
That is looking real good Toby