Spend it on something different that will enrich your shooting, not more of the same.
Printable View
Spend it on something different that will enrich your shooting, not more of the same.
ok
What realistically different purposes can several .22 rifles serve?Quote:
Originally Posted by Toby
only 4, theres a semi for fun my favorite marlin for over 200 the other marlin for under 100 and a old single shot Winchester for fun.
sigh
Well you did ask, Pete :)Quote:
Originally Posted by gimp
Just because you might like one .22 doesn't mean I have too....
Must say Toby which I could hit things at 2 hundy with my marlin
:OSMILEY:I thought he was talking $$$$$:roll::roll:Quote:
Originally Posted by BRADS
Still A4 groups atm but im going to try cut that in half.
Go with what your heart tells u Toby
A muzzle brake on a .22 is a great idea, it will look cool.
make sure the hole at the end is way bigger than a .22 so the bullet has no chance of hitting it.
you could also put racing stripes on it or bedazzle it with rine stones and stuff like that.
it will look sick
Thanks man, Yeah I want it just because I like the look of it. I have done a lot of reading and have found nothing to say its going to make the performance shit so I may end up doing it.Quote:
Originally Posted by username
I think bedazzling is a definite option
if you are set on this idea look into magna porting the barrel.
it would be easy to duplicate with basic tools that you probably allready have, once you tire of the look just lop that part off and thread for supp
you can dress it up and widen the ports however pleases you
I think we need to find you a girlfriend tho
Muzzla brake on a 22 reminds me of...
Attachment 4515
That has got to be the funniest thing I have read in ages :thumbsup:Quote:
Originally Posted by username
Well done :)
Attachment 4525
Attachment 4526
If Bedazzeling is not for you Toby you could try a DIY tartan hogue or a nice hello kitty Duracote.
So there are more options than just a muzzle brake to make it look cool
Fuck that AK looks the bizzo!:P
bro are you serial? what could you possibly hit at 200 yards with a .22lr except jenny shipley?Quote:
Originally Posted by Toby
Quote:
Originally Posted by ARdave
Heaps, if you know what you're doing and have the right setup
...ak?Quote:
Originally Posted by Neckshot
clearly neither of which applies here
Its an SKK (or SKS-D).
Toby - PM me you address details and I'll post you a muzzle brake (more of a flash suppressor) that came off an AR15. You'll have to dill out the 1/2x28tpi thread to whatever diameter you barrel is, and hopefully you can get a tight push fit and locktite it on or something like that? The hole is big enough not to worry about bullet strike etc...but even if it did come off, it would head down range and shouldn't cause any safety concerns.
As a side note, I've seen a NZ manufactured muzzle brake purchased off Trademe go down range with a 208gr .300magnum bullet up its arse on the first shot, it was quite funny as we all looked at it prior to the shot taking place and joked about that happening as it looked like a stupid design with high stress points...then it did! No harm done, muzzle brake was found about 80m away and the bullet never touched it, it was just the air pressure alone that broke it!
kj
Thanks for the offer but I will be fine for now.
I did that bottle suppressor idea it doesn't really do much except get in the way of my scope.
Attachment 4548
did you use subs?
Nope, guess that would make a big difference. I will try it again next time I get subs.
I made a new bottle suppressor and filled the bottle with pink bats, that made a bit of a difference in noise never tried to test its accuracy
uuurrrrr.......sks!:ORLY:
I dont get what you mean
Well I took all the advice here and went against it and made a prototype today, if it works good I will make it a bit tidier and paint it up. If it doesn't work I'm going to make a new tidy one anyway as the sole purpose of it is because I like to look of it.
When you say "work" what do you expect it to do?
Sent from my GT-S5360T using Tapatalk 2
I expect nothing but from alot of reading on internet people say it improves accuracy and reduces recoil I don't believe in that I just want something to look cool. But I am going to test the accuracy and velocity tomorrow to see if it changes.
Good luck there Toby, I hope it looks cool enough for you and gives you a "foot long" .........................................
you dont to to thread your rifle to make a silencer i made my one to slip over the sleeve just needs to be slightly over size 0.02mm oil the blueing and put two grub screws though the sleeve. flatten the point of the grub screw so you dont mess up the blueing to badly. will post a pic after milking. it works very well just ask DougieQuote:
Originally Posted by Toby
If it does move off I will put a screw down the top so it holds, it can go into the screw that held the front sight on.Quote:
Originally Posted by mucko
also when making the sleeve if you cant get hold of a lathe. you can use a adjustable parallel ream
How'd it go and where is the pics of this "cool" 22 ?
It didn't change any velocity and accuracy didn't change so its good, this ones a little rough because I made it from Teflon and I was rushing it on the lathe, I will make a new one later on out of aluminum and spend time on it to make it nice. This one has 3 holes on each side and 3 on top
Attachment 5889
Has it satified your desire for coolness??
