Printable View
Hey guys
Thought I would show some of my latest knives that I finished here.
Bushcraft Knife
Inspired by the Woodlore
Overall Length: 22.5 cm
Blade Length: 11 cm
Blade Thickness: 4 mm
Handle Length: 11.5 cm
Blade Width: 2.8 cm
Handle Material: NZ Rimu
Pins: Brass Pins
Lanyard Hole Lining: Brass Lining
Attachment 39069
Attachment 39070
Attachment 39071
Attachment 39072
Backup knife
It has full flat grind with a secondary bevel.
I made this from 4mm thick 01 Toolsteel. The blade hardness is 58-60 HRC
Overall Length:20cm
Blade Length: 8cm
Blade Thickness: 4mm
Handle Length:12cm
Blade Width: 3.2cm
Handle Material: Walnut with red micarta liners
Pins: Brass Pins
Lanyard Hole Lining: Brass Lining
Attachment 39073
Attachment 39074
Attachment 39075
Attachment 39076
Japanese inspired kitchen knives
Blade material is Stainless steel
Handle is Beech, ebony, copper and Walnut
Sorry for the poor photo's
Attachment 39077
Attachment 39078
Attachment 39079
Attachment 39080
Attachment 39081
Attachment 39082
nice looking knifes awesome work:cool:
:thumbs:
Thanks Sometimes!Quote:
Originally Posted by sometimes
Thanks Thar!Quote:
Originally Posted by Tahr
That looks like a LOT of elbow grease
very noice
Great work, here are a couple more he did for me
http://i252.photobucket.com/albums/h...psznfyjhiz.jpg
http://i252.photobucket.com/albums/h...ps1u2mx51m.jpg
http://i252.photobucket.com/albums/h...psziju4idw.jpg
Thanks for the comments guys, and thanks for the photo's Hendrik470!
Hey Thipa how do you get your makers mark on the blade?
beautiful blades sir.
[QUOTE=Thipa;384612] Japanese inspired kitchen knives
Blade material is Stainless steel
Handle is Beech, ebony, copper and Walnut
Sorry for the poor photo's"
Try taking your pics outside in natural light and you'll have better results. Always nice to see natural talent come thru from a knife maker.
Thanks for the advise, I will definitely do that!
Cheers
.
Thanks for the great photo's!Quote:
Originally Posted by Tahr
[QUOTE=FRST;465779]That is great advise. I will do so!Quote:
Originally Posted by Thipa
Hi ShelleyQuote:
Originally Posted by Shelley
I sent you a PM with a lot more information, but the easiest way, is just search Etching Makers mark on YouTube.
You do not need anything fancy, you can get it done with nail polish, a 12 V battery charger and salt water!
The most difficult thing is to get a stencil that looks professional. Remember any metal that is uncovered and exposed to the electrical current through the salt water will be etched. I have unfortunately ruined a lot of blades with the electricity and salt water going where it was not supposed to go.
Good luck with the knife making and shout if I can give more advise. It is a fantastic hobby!
Please post some photo's of your knives!
Cheers
