Stock work who does it?

4 Attachment(s)

Many years ago I started an 7mm Mag project that sputtered to a stop due to cock ups and unprofessional gunsmithing. It has left me with a semi finished Master-class laminated stock that has been very badly pillar bedded to and old pre-64 Winchester action. So I am going to give it another go. The bolt from the original 30-06 Springfield had been opened up to accept belted mag cases so I am probably going to go with a 300 Win Mag build. Yep not the latest of fasted but longer barrel life and ease of getting brass and dies in my view is more important than another 200fps.

Who out there could finish this stock for me? It needs to be shaped into a prone style pattern and coated. I would like to use the original floor plate and trigger guard again.

Attachment 70685

Attachment 70686

Attachment 70687

Attachment 70688

Thanks Guys

K Gaskill

Nice bit of laminated timber. :thumbsup:

+1 Kevin Gaskill. His number is 07 825 8742

Thanks guys I will give him a ring.