3 Attachment(s)
Stupid Browning x bolt dura touch
So after my last trip into the kawekas where I brought home half the tussock with me stuck to the stock I decided enough was enough.
A bit of research told me I could remove the sticky dura touch coating.
Firstly I tried break clean with no luck so tried some goof off I had lying around which seemed to work.
I ended up scraping most of the coating of with a piece of wood before finishing with a rag and goof off.
Result is a standard looking synthetic stock. You don't have to do the checkering areas as they don't have the dura touch applied.
Attachment 138187
Attachment 138188
It appeared you could go another layer deeper also which I did by accident in one place but it looked like this layer is quite shiny.
Attachment 138189
Hope this might help others with sticky stock troubles.
