-
1 Attachment(s)
The Supp Sock
I found a nice way to make a suppressor sock for my DPT 308 can.
I bought a pair of toddler socks and put the suppressor in muzzle first, pulled it over as tight as possible so the fabric stretched over it snug. I could have finished it here at the base but there was a lot more sock left so I cabled tied the barrel end and pulled it forward again, one more cable tie at the muzzle end, then some contact adhesive on the sock at the end. I cut a small hole in the muzzle end. Looks nice in solid black cotton and should keep it from making so much noise on twigs in the bush, and keep it warm too :-P
Attachment 33991
-
Cheap simple solution, hope its not a melty plastic type fabric.
-
-
It seems to be cotton so won't melt. Also polyester doesn't melt until 250C.
-
Quote:
Originally Posted by
Tommy
What does it do?
Keeps it warm!
-
-
It's a common problem, happens to the best of them
-
Fits like a cock in a ....errr....sock.......off down to the local laundramatt....bound to be an odd sock in there!!!!!!!
-
Good skills, might be a pain if hooked up in blackberry, lawyer etc?
