Thread: Securing an E-cat safe...

Well i made a new wall from 4x2, probably will never get a job as a carpenter but its fairly solid.
The two main places were the safe is secured to on the wall i doubled up on the 4x2 to make some solid beams.
Lined it with 16mm MDF, as the ply was very expensive from bunnings...
Used a milloin screws and nails, so should not go anywhere!

Safe secured to beams with 4x 10mm x90mm coach screws.

Next job is rambo mission under the house for the two floor fixings, looking forward to it...