Classic. No issues with trust either. You are a caretaker. Ha ha ha ha
Printable View
Get an empty one and drill a hole in the lid and screw a mag wheel tire valve into it and pump it up,would be interested to see what pressure you get but bet it wont be anywhere near 100psi, be surprised if it got to 20.
Of course you want a locking fitting so your not holding it when it pops, to lessen effect fill with water first(less expansion on fail point)
Yep but speed of expansion would add to that?
only if you can hold the pressure
I've got a can I'll give it a bash, if I disappear from the forum, you'll know your wrong!:thumbsup:
for safetys sake fill it with water and use a fitting that doesn't need holding on so you can charge from a distance.
blowing stuff up with air was how i filled in the day when i worked at a tire shop before doing my Appy.
Any tire tube will not take more than 2psi and a plastic coke bottle will take 140 and not pop even if you grind the sides a bit!
I'll get one of my employees to hold it!:thumbsup: the one I carry life insurance on! Think I'll explode it with BP and a fuse. Next BP shoot.
Hiding two identical keys in separate locations in your house increases the chances of someone finding one of them and gaining access to you safe. I would put it offsite, or in a place that takes a while to access, e.g. buried.
I love how this has turned into an experiment with explosives haha! Keen to see how you get on Maca hahaha
Yep thought about that, soldered tin. I might weld this one first!:ORLY:
Am I the only one here who thinks this thread is a BAD idea? This is the internet, a public forum.
You are basically creating a check list of most likely spots to look.