Thread: Shot gun 3gun

I don't get cut, just trap the tip of my thumb at the end of the lifter and pinch it.

Haven't done it for a while now and actually getting some speed up quad loading which is pleasing considering my small hands.
Mag spring is pretty strong on the gun so it should get better with use.

Sent from my SM-G900F using Tapatalk

Originally Posted by R93

I don't get cut, just trap the tip of my thumb at the end of the lifter and pinch it.

Haven't done it for a while now and actually getting some speed up quad loading which is pleasing considering my small hands.
Mag spring is pretty strong on the gun so it should get better with use.

Sent from my SM-G900F using Tapatalk

Can get a roulette tac plus 2 that screws on in place of the end cap to increase capacity by another two rounds. Works mint with the uncut factory spring and lightens up resistance significantly esp when first loading the mag.

Originally Posted by 40bung

Can get a roulette tac plus 2 that screws on in place of the end cap to increase capacity by another two rounds.

Not positive, but I think Roulette went under.

Originally Posted by specweapon

How does everyone interpret the rules for filing back around the loading port on a Standard/Tactical class shotgun, allowed or not?
I've filed mine back after reading the rule book , its says "Replacements of or modifications to elevators/floor plates, provided no part protrudes beyond the standard frame of the gun, are permitted"

It's fine (provided it is still functional and safe). Technically there is no IPSC tactical division; the concept was borrowed from USPSA but with the introduction of the grand tournament rule set it is being not being offered as much. Not that it matters as you still use the standard shotgun criteria.