Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

DPT Terminator


User Tag List

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 16
Like Tree5Likes

Thread: Shotgun Slugs

  1. #1
    Member
    Join Date
    Apr 2013
    Location
    Canty
    Posts
    148

    Shotgun Slugs

    Can I use the Star crimp or do I have to roll crimp with the Lee slugs or Lyman slugs? I was thinking of using Vectan A1 powder, 1oz Lee Slugs, Winchester 209 primers & winchester wad like aa12, in Winchester compression formed hulls. You guys have any thoughts on this?

  2. #2
    Member
    Join Date
    May 2015
    Location
    Rolleston
    Posts
    559

  3. #3
    Member
    Join Date
    Aug 2017
    Location
    King Country
    Posts
    2,429
    Quote Originally Posted by Bob Da Browning View Post
    Can I use the Star crimp or do I have to roll crimp with the Lee slugs or Lyman slugs? I was thinking of using Vectan A1 powder, 1oz Lee Slugs, Winchester 209 primers & winchester wad like aa12, in Winchester compression formed hulls. You guys have any thoughts on this?
    I've been star crimping those slugs for years without a problem. Use AP70N and both WAA 12SL or WAA 12F114 wads.
    Micky Duck likes this.

  4. #4
    Member Tertle's Avatar
    Join Date
    Dec 2011
    Location
    Christchurch NZ
    Posts
    1,126
    Quote Originally Posted by outlander View Post
    I've been star crimping those slugs for years without a problem. Use AP70N and both WAA 12SL or WAA 12F114 wads.
    @Bob Da Browning i too have followed the path as outlined above and it has served me very well, ive also gone and purchased roll crimping and hull conditioning spinny go round things, welcome to the affliction

  5. #5
    Member
    Join Date
    Feb 2013
    Location
    Wanganui without an "h"
    Posts
    3,023
    Quote Originally Posted by outlander View Post
    I've been star crimping those slugs for years without a problem. Use AP70N and both WAA 12SL or WAA 12F114 wads.
    @outlander Reassuring........As I have the Lyman 525 grain slugs, WAA12 wads and APN70 N, I would appreciate you telling your AP70N load, (grams/ grains / ounces) , as I was going to start from scratch, reinvent the wheel with 23 grains working upwards, ( which I suspect would involve a few "starts") so your end point weight and observation on effective range would be greatly appreciated.
    Ta ever so.
    .

  6. #6
    Member Tertle's Avatar
    Join Date
    Dec 2011
    Location
    Christchurch NZ
    Posts
    1,126
    Quote Originally Posted by 7mmwsm View Post
    I roll crimp mine partly because I have gadget for rolling them. But mainly so they are easy to identify. Letting a slug go that you thought was shot could have drastic results.
    That’s actually a really good point, load ID, the gadget I eventually purchased was a ballistic products roll crimper, I later tinkered with plastic shot over cards which I used with my buckshot loads, again using apn 70 and the WAA shotgun wads, I had / have 1000’s of win shotgun hulls and eventually I used different coloured hulls if I was star crimping. I even created reduced length rounds with very pleasing results! I will send you some info via PM that may help

  7. #7
    Member
    Join Date
    Aug 2017
    Location
    King Country
    Posts
    2,429
    Quote Originally Posted by Kiwi Sapper View Post
    @outlander Reassuring........As I have the Lyman 525 grain slugs, WAA12 wads and APN70 N, I would appreciate you telling your AP70N load, (grams/ grains / ounces) , as I was going to start from scratch, reinvent the wheel with 23 grains working upwards, ( which I suspect would involve a few "starts") so your end point weight and observation on effective range would be greatly appreciated.
    Ta ever so.
    Sure. Through my el cheapo Gun City 18" pump cylinder bore riot gun, the 525 gr Lyman slugs leave the barrel @ 1050 fps avg. with 23.5 gr of AP70N. With 24 gr AP70N they go 1100 fps avg. You can expect another 100-150 fps through a 26"/28" barrel with a full choke.

  8. #8
    Member
    Join Date
    Aug 2017
    Location
    King Country
    Posts
    2,429
    Quote Originally Posted by outlander View Post
    Sure. Through my el cheapo Gun City 18" pump cylinder bore riot gun, the 525 gr Lyman slugs leave the barrel @ 1050 fps avg. with 23.5 gr of AP70N. With 24 gr AP70N they go 1100 fps avg. You can expect another 100-150 fps through a 26"/28" barrel with a full choke.
    Forgot to mention that I also use WA12 F114 wads with a home made under shot card.

  9. #9
    Member
    Join Date
    Aug 2019
    Location
    South Otago
    Posts
    3,818
    Quote Originally Posted by 7mmwsm View Post
    I roll crimp mine partly because I have gadget for rolling them. But mainly so they are easy to identify. Letting a slug go that you thought was shot could have drastic results.
    I’ve known that to happen with ‘waxed’ loads that had no distinguishing marking.
    ‘Many of my bullets have died in vain’

  10. #10
    Member
    Join Date
    Feb 2013
    Location
    Wanganui without an "h"
    Posts
    3,023
    Quote Originally Posted by outlander View Post
    Sure. Through my el cheapo Gun City 18" pump cylinder bore riot gun, the 525 gr Lyman slugs leave the barrel @ 1050 fps avg. with 23.5 gr of AP70N. With 24 gr AP70N they go 1100 fps avg. You can expect another 100-150 fps through a 26"/28" barrel with a full choke.
    My thanks @outlander for you information. I shall stick with the WAA12 wads as they are a nice fit for the slug and I have i i/2 bags of them :>)
    Surprised that I wasn't too far off with my starting figure of 23 grains..

    They will be fired from a 20 inch barrel and as I am interested in the effective range can you give an opinion on that? Effective IMHO being up to 6 inches off the bull.......or is that the best I can expect.

    I ask 'cos this week I found I grouped 4 of 5, 6 inches off @ 50 metres and that I consider being 'cos I had only set up the red spot sight using a Nikko Stirling Bore Sight Kit to "get onto paper".

    So, a comment on effective range would be greatly appreciated.

    Thank You.
    outlander likes this.
    .

  11. #11
    Member
    Join Date
    Aug 2017
    Location
    King Country
    Posts
    2,429
    Quote Originally Posted by Kiwi Sapper View Post
    My thanks @outlander for you information. I shall stick with the WAA12 wads as they are a nice fit for the slug and I have i i/2 bags of them :>)
    Surprised that I wasn't too far off with my starting figure of 23 grains..

    They will be fired from a 20 inch barrel and as I am interested in the effective range can you give an opinion on that? Effective IMHO being up to 6 inches off the bull.......or is that the best I can expect.

    I ask 'cos this week I found I grouped 4 of 5, 6 inches off @ 50 metres and that I consider being 'cos I had only set up the red spot sight using a Nikko Stirling Bore Sight Kit to "get onto paper".

    So, a comment on effective range would be greatly appreciated.

    Thank You.
    My pump has ghost ring sights and in my experience with the Lyman slugs, 5" off bull @ 50 metres, would make me very happy. I also find that the Lyman slug is the least accurate of the three. Lee 1oz and the round ball always is better.
    Kiwi Sapper likes this.

  12. #12
    Member
    Join Date
    Jul 2020
    Location
    Central North Island
    Posts
    4,216
    Some time ago I hunted wild bulls in tiger country that were tagged as possibly spreading TB. Tight country with the odd 50-75m window for a shot. My goodness I never felt undergunned with a pump loaded with roll your own slugs
    outlander likes this.

  13. #13
    Member
    Join Date
    Aug 2017
    Location
    King Country
    Posts
    2,429
    Quote Originally Posted by XR500 View Post
    Some time ago I hunted wild bulls in tiger country that were tagged as possibly spreading TB. Tight country with the odd 50-75m window for a shot. My goodness I never felt undergunned with a pump loaded with roll your own slugs
    With roughly three times the energy of a .44 mag, I can imagine. Can you recall which slug it was that you used?

  14. #14
    Member
    Join Date
    Jul 2020
    Location
    Central North Island
    Posts
    4,216
    Looong time ago, but the one with the rifling cast into it if I recall correctly. Round nose

  15. #15
    Member
    Join Date
    Aug 2017
    Location
    King Country
    Posts
    2,429
    Quote Originally Posted by XR500 View Post
    Looong time ago, but the one with the rifling cast into it if I recall correctly. Round nose
    More than likely it was the Brenneke slug.

 

 

Similar Threads

  1. 12ga shotgun slugs
    By Smallfoot in forum Shotgunning
    Replies: 65
    Last Post: 25-06-2021, 09:23 PM
  2. Ghetto shotgun slugs
    By TheWuce in forum Shotgunning
    Replies: 12
    Last Post: 16-10-2018, 05:44 PM
  3. slugs
    By scottrods in forum Shotgunning
    Replies: 21
    Last Post: 02-08-2012, 01:28 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!