Thread: Muzzle brakes

I have a wee line of muzzle brakes that I fit to rifles or sell to people for them to get fitted.

I'll get some videos up of them in action shortly both radial an directional brakes for personal choice.

As well all know some brands an styles have huge poi change for the hunters that have them on an off.

Here are some photos of radial an directional brakes I make

Prices are. . . . . .
Directional brake (fitted, thread cap, 'recrown) $285
Radial brake (fitted, thread cap, 'recrown) $215

Will up load more pics an vids of them on an off rifles to show reduction

Sent from my GT-I9300T using Tapatalk 2

moranges brakes are one thing ill testify for!!

Hes thrown a few at me to try ova the last cupple years and the latest one he made for the edge makes her boot less than a .243!!!

Originally Posted by baldbob

moranges brakes are one thing ill testify for!!

Hes thrown a few at me to try ova the last cupple years and the latest one he made for the edge makes her boot less than a .243!!!

The old hammer head take done fuck all for the time it took for me to make that then thin it down the bugger should be gold plated

Maybe i shouldnt have put up the last photo..........shows my boots an me been lazy c$#t sitting on the lathe

Originally Posted by tui_man2

The old hammer head take done fuck all for the time it took for me to make that then thin it down the bugger should be gold plated

Hey we spent a fair hour discussing and drawing that one up on paper over "bourbons" theory said it wud be macine lol

Shiz howd you get good feedback outta me? im shocked...

Oh thats right it was something of mine u didnt break for once lol

Originally Posted by baldbob

Hey we spent a fair hour discussing and drawing that one up on paper over "bourbons" theory said it wud be macine lol

Shiz howd you get good feedback outta me? im shocked...

Oh thats right it was something of mine u didnt break for once lol

Here's Adam's brake fitted to his 338 edge. . . . .


Sent from my GT-I9300T using Tapatalk 2

get some vids up,
hopefully one of these will be better than the one on the savage

Originally Posted by longrange308

get some vids up,
hopefully one of these will be better than the one on the savage

A lot better than the standard ones on the savages mate. Will get on to it:thumbup:

Sent from my GT-I9300T using Tapatalk 2

Wash your hands before you take photos abe haha

Originally Posted by crnkin

Wash your hands before you take photos abe haha

Working man's hands you wouldn't under stand haha.

They only get clean after few days off the stains come out

Sent from my GT-I9300T using Tapatalk 2

Ohhhhhhhh attempted burn

Abe's radial brakes rock would never think I was shooting a 7mm Rum.

Few more to add to pics
Here's some small radial an directional brakes that add minimal to the barrel length and minimal weight and so far they have very very little poi shift on the ones I have fitted an done loads for with the most been 1.2 moa that's only on 17 tubes so far plus my testing ones so early days but has gone well.

The directional adds 35mm to the barrel length and 30mm on the radial, and 20mm on the small radial.

These are 20mm in diameter and have most threads you can think of an if I don't i an get them done easy.

Shown next to 6mm saum to show for scale

Sent from my GT-I9300T using Tapatalk 2

Got any big fellas Abe?

Originally Posted by L.R

Got any big fellas Abe?

For also make some bigger ones for those bigger cases to. Those are small ones have some mediums shown above to an another bigger to

Sent from my GT-I9300T using Tapatalk 2

This is the bigger one

Sent from my GT-I9300T using Tapatalk 2