Thread caps and other parts

Attachment 16469


Just a quick note to let the guys know that i will soon be producing custom (and standard size) thread caps, in the following sizes:

1/2-20, 1/2-28, M14x1.0mm, 9/16-24, 9/16-28, 5/8-24, M18x1.0mm, 3/4-28.

All single-point cut from 303 stainless (mostly), unless someone wants a large run of blued thread-caps or something 'exotic'.

More importantly, they can be ordered in 'oversize' thread specs: +0.002" through to 0.010" oversize, to suit barrels that have been threaded to suit alot of the oversize silencer threads that seem to be a bit of a re-occurring issue at the moment. (can also do undersize -tight-spec - threads if you want too.)

Price: $20.00 each for one-offs.

Trade guys who want to order a reasonable (or large) quantity can talk to me about a special rate for them.

Custom bolt handles/knobs, bedding pillars, and a few other treats are in the pipeline.

Cheers,

Dean.

Quote:

---

Originally Posted by dfmaisey

Attachment 16469


Just a quick note to let the guys know that i will soon be producing custom (and standard size) thread caps, in the following sizes:

1/2-20, 1/2-28, M14x1.0mm, 9/16-24, 9/16-28, 5/8-24, M18x1.0mm, 3/4-28.

All single-point cut from 303 stainless (mostly), unless someone wants a large run of blued thread-caps or something 'exotic'.

More importantly, they can be ordered in 'oversize' thread specs: +0.002" through to 0.010" oversize, to suit barrels that have been threaded to suit alot of the oversize silencer threads that seem to be a bit of a re-occurring issue at the moment. (can also do undersize -tight-spec - threads if you want too.)

Price: $20.00 each for one-offs.

Trade guys who want to order a reasonable (or large) quantity can talk to me about a special rate for them.

Custom bolt handles/knobs, bedding pillars, and a few other treats are in the pipeline.

Cheers,

Dean.

---

Ah too good Dean, so can I come on in and swap out my cross hatched for a slick looking smoothy?

How do I order a couple of 14x1?
Pay by Visa.

Thanks dean, are you going to make lens covers for nightforce scopes ?? :)

Quote:

---

Originally Posted by Gibo

Ah too good Dean, so can I come on in and swap out my cross hatched for a slick looking smoothy?

---

Just for you Gibo - yes !

Quote:

---

Originally Posted by dfmaisey

Just for you Gibo - yes !

---

Ha ha good man but I was just taking the piss, mine is fine :thumbsup:

Quote:

---

Originally Posted by Tahr

How do I order a couple of 14x1?
Pay by Visa.

---

Just tell me the length, diameter, and thread that you want. I will do them to 'standard' thread specs unless requested otherwise.

Payment via direct credit is best. Zap me a PM, or email me to place order. I will be making custom-order ones from first week of December, as i already have too much on my plate until then and also need time to sort programs, etc. Email contact will be a bit sporadic over the next two weeks also. Cheers.

Quote:

---

Originally Posted by 7mmsaum

Thanks dean, are you going to make lens covers for nightforce scopes ?? :)

---

Ha ha. Thanks 'A'. Don't be putting any more silly ideas in my head, there are more than enough to deal with at the moment already !

I will be machining stainless 99% of the time, but may look at doing some alloy parts at some stage. So answer is 'maybe', but don't hold your breath. :D

Chrs, Dean.