Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Alpine Terminator


User Tag List

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 29
Like Tree12Likes

Thread: Experienced bowhunter test custom made arrows

  1. #1
    Member
    Join Date
    Jul 2014
    Posts
    91

    Experienced bowhunter test custom made arrows

    Hey there folks ..been a member since 2014 but only confirmed my registration a couple weeks ago so hey ..

    I am looking for a experienced compound bow hunter who is keen to try out some customs made micro diameter arrows with broadheads ..

    I am a keen enthusiast of tweaking my own equipment and definitely would like to have my own archery/bow hunting business and thought I would start with custom made arrows ..

    I have a workshop set up in my garage and would definitely like to have a bowhunter test these custom builds ..

    The requirement is I am wanting a bowhunter with a 28.5" draw length ..

    3 custom made arrows and broadheads that have been spined so they all flex in the same manner ..this set up flys like a dart and pounds like a jackhammer

    This is a setup I build for myself shooting a 61.5lb Bowtech Carbon Knight set at 28.5" draw the details are as follows (Theme is black & yellow)

    - Over all length of arrow from nock groove to tip of broadhead is 28.5" (27" end of outsert)
    - Deer Crossing SD hunter 350 micro diameter shaft
    - Norway 2.1" fusion vanes (cock vane black, 2x yellow)
    - transparent yellow pin nock & aluminium insert
    - black aluminium outsert
    - broadhead look a like
    - 454grains (+-1 grain between the 3 arrows)

    My drop away rest is 25" from the nock groove @ full draw ..it has room for another inch (26") before your messing with the outsert which flanges out from 6.1mm - 7.93mm (standard size) ..so if your rest falls within these thresholds give em a crack

    Note:
    From my experience the broadhead hits the same spot as the field point no messing around with gear (with a tuned setup)

    Copy & Paste: https://youtu.be/plmEVRzZb2g (me shooting these in action with a field point & broad head @ 50m)

    So leave details along with photos of Deer taken and I will carefully choose a candidate

    Best Regards




    Sent from my iPhone using Tapatalk
    Last edited by Kiwininja; 13-02-2017 at 10:14 PM.
    Feather or Shoot and Boaraxa like this.
    Bowtech Carbon knight & Fuel
    Deer crossing SD hunter micro diameter shafts, pin nocks, fusion 2.1" vanes
    Helix copy broad heads, Wasp drone & hammer broad heads
    Rip Cord drop away
    Scott Rhino release & Octane 5" stabiliser

  2. #2
    Member
    Join Date
    Jul 2014
    Posts
    91
    Forgot to mention these are free test ..


    Sent from my iPhone using Tapatalk
    Bowtech Carbon knight & Fuel
    Deer crossing SD hunter micro diameter shafts, pin nocks, fusion 2.1" vanes
    Helix copy broad heads, Wasp drone & hammer broad heads
    Rip Cord drop away
    Scott Rhino release & Octane 5" stabiliser

  3. #3
    Sending it Gibo's Avatar
    Join Date
    Feb 2013
    Location
    The Hill
    Posts
    23,206
    Bloody good shooting mate. Is it called shooting? Anyway good luck with the test
    Kiwininja likes this.

  4. #4
    Member
    Join Date
    Jul 2014
    Posts
    91
    Quote Originally Posted by Gibo View Post
    Bloody good shooting mate. Is it called shooting? Anyway good luck with the test
    Hey Gibo ..cheers,as far as I know it is shooting ..I know it sounds or very rifle like but that's all I've known it as ..there is also flinging arrows down range but,it's what I've come to know it as


    Sent from my iPhone using Tapatalk
    Gibo likes this.
    Bowtech Carbon knight & Fuel
    Deer crossing SD hunter micro diameter shafts, pin nocks, fusion 2.1" vanes
    Helix copy broad heads, Wasp drone & hammer broad heads
    Rip Cord drop away
    Scott Rhino release & Octane 5" stabiliser

  5. #5
    270 King of the Calibres oraki's Avatar
    Join Date
    Jun 2015
    Location
    CSI Flatlander
    Posts
    2,679
    I take it that you used same point of aim for both arrows. Would that be normal for broad head and field?id have thought they'd normally have different point of impact. What range could you successfully hit minute of deer, and still retain enough energy for successful kill?
    Kiwininja likes this.

  6. #6
    Member
    Join Date
    May 2015
    Location
    Parahaki, Whangarei
    Posts
    1,274
    Quote Originally Posted by oraki View Post
    I take it that you used same point of aim for both arrows. Would that be normal for broad head and field?id have thought they'd normally have different point of impact. What range could you successfully hit minute of deer, and still retain enough energy for successful kill?
    I think broad heads kill by cutting major arteries, or puncturing the heart.
    From my limited knowledge of 'stick hurling', every article I've read talks about this goal.
    At 300-350 fps launch speed, power factor won't be readable - too slow.
    Stalking skill and arrow placement is the trick.

  7. #7
    Member
    Join Date
    Jul 2014
    Posts
    91
    Quote Originally Posted by oraki View Post
    I take it that you used same point of aim for both arrows. Would that be normal for broad head and field?id have thought they'd normally have different point of impact. What range could you successfully hit minute of deer, and still retain enough energy for successful kill?
    Absolutely Oraki ..most of the time I'm having to adjust my broadheads to follow my field points by adjusting my rest but with this setup I didn't need to adjust it at all is why I love it ..

    but a kool thing a world renowned archer/bowhunter John Dudley stated why change the rest if you are getting consistent groups irrelevant if they don't hit by the field points just adjust your sight ..sounded logical to me ..and on question number

    2) I have watched a guy by the name of Tim Wells who shoots compound no peep no pins smoke a mulie deer at 100 yards (on the run) ..it ran on for another 50yrds before keeling over ..

    also because there are so many variables I suppose like calibre of ammo and rifle in relation to length, weight and type of broadhead in bowhunting it has the momentum to still be affective out to 200m (gravity plays its part) but this is all done by research and theory as I have not come across someone who has dropped a deer at that distance ..

    the main reasons we don't have a scope for that distance and because you are having to hold the bow still in the air without having the ability to prop it against or on something the wind plays a major factor in been able to maintain composure for that distance

    But with bow design these days we are having the ability to shoot further distance with great accuracy efficiency and being able to pull more weight (not that pulling more weight is a necessity) but pulling 70lb bow 5 yrs ago you had to be a gym junkie were as these days it feels like pulling 50lb because of cam efficiency riser design limb advances so yea that is what I've come to understand ..

    For me anything 20-30m is child's play even with the heart pumping 40-50 I'm very confident 60-70m is where the confidence is above average only because I am not practicing out to that distance and beyond ..well not yet anyway, but Cameron Hanes (pro bowhunter) doubles his distance @ practice ..so he practices 160 yards to feel extremely confident that he is smashing x's at 80 yards

    there maybe others out there with a different opinion but that's what makes the world an exciting and fun place ..as we are humans not robots ..apologies if it's a long reply


    Sent from my iPhone using Tapatalk
    Beaker likes this.
    Bowtech Carbon knight & Fuel
    Deer crossing SD hunter micro diameter shafts, pin nocks, fusion 2.1" vanes
    Helix copy broad heads, Wasp drone & hammer broad heads
    Rip Cord drop away
    Scott Rhino release & Octane 5" stabiliser

  8. #8
    Member
    Join Date
    Jul 2014
    Posts
    91
    Quote Originally Posted by WallyR View Post
    I think broad heads kill by cutting major arteries, or puncturing the heart.
    From my limited knowledge of 'stick hurling', every article I've read talks about this goal.
    At 300-350 fps launch speed, power factor won't be readable - too slow.
    Stalking skill and arrow placement is the trick.
    Absolutely WallyR that is the first and foremost ..but the question is what if you don't have that opportunity and his question was merely for me about effective range ..cheers


    Sent from my iPhone using Tapatalk
    Bowtech Carbon knight & Fuel
    Deer crossing SD hunter micro diameter shafts, pin nocks, fusion 2.1" vanes
    Helix copy broad heads, Wasp drone & hammer broad heads
    Rip Cord drop away
    Scott Rhino release & Octane 5" stabiliser

  9. #9
    Member
    Join Date
    Jul 2014
    Posts
    91
    Quote Originally Posted by WallyR View Post
    I think broad heads kill by cutting major arteries, or puncturing the heart.
    From my limited knowledge of 'stick hurling', every article I've read talks about this goal.
    At 300-350 fps launch speed, power factor won't be readable - too slow.
    Stalking skill and arrow placement is the trick.
    Have a look on YouTube as well champ lots of information in real time to look at as well ..cheers


    Sent from my iPhone using Tapatalk
    Bowtech Carbon knight & Fuel
    Deer crossing SD hunter micro diameter shafts, pin nocks, fusion 2.1" vanes
    Helix copy broad heads, Wasp drone & hammer broad heads
    Rip Cord drop away
    Scott Rhino release & Octane 5" stabiliser

  10. #10
    Member
    Join Date
    Jul 2014
    Posts
    91
    I suppose this video was a demonstration that 20m with this arrow you could do it with your eyes closed


    Sent from my iPhone using Tapatalk
    Bowtech Carbon knight & Fuel
    Deer crossing SD hunter micro diameter shafts, pin nocks, fusion 2.1" vanes
    Helix copy broad heads, Wasp drone & hammer broad heads
    Rip Cord drop away
    Scott Rhino release & Octane 5" stabiliser

  11. #11
    Member SlowElliot's Avatar
    Join Date
    Jan 2017
    Posts
    226
    Nice production on your video.
    Can't comment on your arrows as i no nothing about archery, but seeing the old rugby grounds brings back some memories.
    born and raised in matamata.
    Cheers.
    Kiwininja likes this.

  12. #12
    Member
    Join Date
    Jul 2014
    Posts
    91
    Quote Originally Posted by SlowElliot View Post
    Nice production on your video.
    Can't comment on your arrows as i no nothing about archery, but seeing the old rugby grounds brings back some memories.
    born and raised in matamata.
    Cheers.
    Hahaha and wow ..what a small world champ ..awesome too take you back down memory lane!


    Sent from my iPhone using Tapatalk
    Bowtech Carbon knight & Fuel
    Deer crossing SD hunter micro diameter shafts, pin nocks, fusion 2.1" vanes
    Helix copy broad heads, Wasp drone & hammer broad heads
    Rip Cord drop away
    Scott Rhino release & Octane 5" stabiliser

  13. #13
    Member
    Join Date
    Jul 2014
    Posts
    91
    Quote Originally Posted by SlowElliot View Post
    Nice production on your video.
    Can't comment on your arrows as i no nothing about archery, but seeing the old rugby grounds brings back some memories.
    born and raised in matamata.
    Cheers.
    Apologies for my "hahaha" SlowElliot that was merely a reaction to our conversation on your scent thread and both being born here in Matamata and not knowing about it! ..where are you these days?


    Sent from my iPhone using Tapatalk
    Bowtech Carbon knight & Fuel
    Deer crossing SD hunter micro diameter shafts, pin nocks, fusion 2.1" vanes
    Helix copy broad heads, Wasp drone & hammer broad heads
    Rip Cord drop away
    Scott Rhino release & Octane 5" stabiliser

  14. #14
    Member
    Join Date
    Jun 2013
    Location
    Middle Earth
    Posts
    4,055
    My current draw length is 28". But I am not sure I would be a good candidate for you, I shoot an old switchback arround the 65 lbs, and limit my shouting at 30 m ish ( except for a cat shot a 45 m last year;-). I use a whisper biscuit.

  15. #15
    Member
    Join Date
    Jul 2014
    Posts
    91
    Quote Originally Posted by Friwi View Post
    My current draw length is 28". But I am not sure I would be a good candidate for you, I shoot an old switchback arround the 65 lbs, and limit my shouting at 30 m ish ( except for a cat shot a 45 m last year;-). I use a whisper biscuit.
    Hey Friwi cheers for the reply champ ..do you know the length between you whisker rest and string (nock groove) at full draw ..if it is greater than 26" (66cm) might pose a problem for accuracy ..but then again if you only shooting around the 30m mark shouldn't pose to much of a problem ..

    the bow is fine as I have shot it out of my Bowtech fuel as well @ 70lbs with the same results ..plus the whisker biscuit will be a great test for fletching (glue adhesion) ..how often do you get out? And when your out hunting do you have a posey that claims great success?? Only reason why I ask is for results bud to see if they are a good build or not ..

    Personally I know they are awesome flyers (as the vid demonstrates) but wanting feed back on deer recovery ..how they performed in the field as I cannot get out all the time (even though would love too) because of varying other commitments ..wanting someone to test it sooner than later if you catch my drift ..


    Sent from my iPhone using Tapatalk
    Bowtech Carbon knight & Fuel
    Deer crossing SD hunter micro diameter shafts, pin nocks, fusion 2.1" vanes
    Helix copy broad heads, Wasp drone & hammer broad heads
    Rip Cord drop away
    Scott Rhino release & Octane 5" stabiliser

 

 

Similar Threads

  1. Bowhunter from Denmark
    By Flohr in forum Archery
    Replies: 5
    Last Post: 03-01-2017, 08:21 AM
  2. Arrows
    By Ash123 in forum Archery
    Replies: 0
    Last Post: 30-12-2015, 03:36 PM
  3. Crafting Arrows
    By seandundee in forum Archery
    Replies: 20
    Last Post: 05-04-2015, 10:12 AM
  4. Home made rifle stock, made from good old native Rimu. check this vid out
    By kingstoncowboy in forum Projects and Home Builds
    Replies: 24
    Last Post: 10-02-2014, 12:21 PM
  5. Just experienced Heli-Hunting first hand
    By DaveHill in forum Hunting
    Replies: 46
    Last Post: 08-06-2013, 09:39 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!