Printable View
i now have a PSE Brute NP(2007?) , took it to local shop, he couldn't adjust it down to 27 inch, said it wont do it, internet says its adj from 25-30 and its written on the bow, anyone have any clue how to adjust the cam to 27? or where id find this info? im in Christchurch
cheers
Talk to archery direct in Hamilton. They know their stuff.
See page 7 of this for the NRG cam adjustment if this is the cam on your bow?
http://pdfstream.manualsonline.com/b...19512c4d19.pdf
Sounds like you may need to change the module.
http://www.archerytalk.com/vb/showth...1122367?page=1
Yeh I had found that PDFs Matt, I'll re read it, thanks
Looks like you need a number 7 module and a number 7 stop.
Attachment 45380
I see there are some available on eBay.
on the lookout for a PSE NRG cam module #7
ive adjusted the string stop down to position 7(thanks Matt+ Archery Direct in Hams!) to suit my draw length which stops good, but the cams dont reduce the pull weight untill 98% into the draw, so im guessing a module change is the key to make the letoff earlier.....
all sorted now, bow is a scalpel.
2007 PSE Brute NP (Right Hand)
PSE Wood Grip
Cobra Sidewinder LX 5 Pin Sight
Fuse Axium 6" Stab
ProString Archery (Blue/Flo Ornage/Flo Green) Strings/Cables
Peep/D-Loop/Kisser Button/Wrist Strap/String Dampeners
PSE Mongoose 6 Arrow Quiver
Posten Standard V-Bar Set (30"/10"/10", Flo Ornage/Flo Green Wraps, 3 Weight Sets/Sleeves/Maxjax)
Plano Pillarlock Camo Case
5 PSE Radial X-Weave STL Hunter 200s (100gr. Muzzy 3 Blades/2" Blazers/Accunocks)
12 Beman 9.3 400s (2" Blazers/Accunocks)
LP Archery Bow Stand
Tru Ball Short N Sweet Buckle
Carter Insatiable 3 Finger (Black)
Bohning Archery Red Field Quiver (Accessorie Bag Included)
2 Tubes String
Hex Wrench for Limb Bolts
1 PSE Radial X-Weave STL Hunter 200 (Original Fletching/Nock/Assorted BH)
