207451 This one shows the sail a little better, I try to upload it from my phone but the ratio of thumb to screen was to great.
Liked On: 05-10-2022, 10:02 PM
207451 This one shows the sail a little better, I try to upload it from my phone but the ratio of thumb to screen was to great.
Liked On: 05-10-2022, 09:20 PM
207410 I know it's a little windy but one numpty put a sail on his scooter.
Liked On: 05-10-2022, 09:20 PM
207451 This one shows the sail a little better, I try to upload it from my phone but the ratio of thumb to screen was to great.
Liked On: 05-10-2022, 08:36 PM
207410 I know it's a little windy but one numpty put a sail on his scooter.
Liked On: 05-10-2022, 06:10 PM
207410 I know it's a little windy but one numpty put a sail on his scooter.
Liked On: 05-10-2022, 02:12 PM
207410 I know it's a little windy but one numpty put a sail on his scooter.
Liked On: 05-10-2022, 01:52 PM
https://youtu.be/-_kXIGvB1uU I at least make it easy for the magic basket by throwing on the floor by the chest of draws, then the only have to move 2 feet into the draw.
Liked On: 25-09-2022, 11:36 PM
https://youtu.be/-_kXIGvB1uU I at least make it easy for the magic basket by throwing on the floor by the chest of draws, then the only have to move 2 feet into the draw.
Liked On: 25-09-2022, 07:43 PM
It’s hard to know, but it may be the compressor start gear. There’s a start relay that disconnects the start capacitor when the compressor gets away. Do you have a clamp meter? To measure start...
Liked On: 18-09-2022, 09:38 AM
What gear do you have? If you have access to a blow torch it’s easy to seal with silfoss.
Liked On: 28-08-2022, 09:18 PM
I think I’d put the sticks cut to shape above Kneed-it. :thumbsup:
Liked On: 20-08-2022, 09:38 PM
What gear do you have? If you have access to a blow torch it’s easy to seal with silfoss.
Liked On: 20-08-2022, 09:03 PM
Copper tig welds really well, but welding with silfoss will be fine. If you get it hot enough in use to melt silfoss you’ll have other problems to worry about.
Liked On: 17-08-2022, 01:56 PM
Minimum, age statement, not chill filtered, higher than 40%. If he’s new to Whiskey go highland = no peat.
Liked On: 08-08-2022, 06:03 PM