Snow up the Tamaki 201242
Liked On: 10-07-2022, 04:33 PM
There's deer everywhere in the Rua's. You just got to pick your weather and get up before the deer. Food and sun. All you need to find. The deer will come to you.
Liked On: 10-07-2022, 04:23 PM
201196 Need I say more?
Liked On: 10-07-2022, 01:28 AM
Looking at my 4th addition as well there are some different powders mentioned for the lighter 243 but the concepts the same. Your photo seems the same format as the later lyman manual of mine. For...
Liked On: 09-07-2022, 02:24 PM
Trailboss doesn't need filler.
Liked On: 09-07-2022, 02:19 PM
Suggest you do a lot of research on using fillers. Some still use them. They were used a fair bit a few decades back and notable writers published load info. What came up for me is that there were...
Liked On: 09-07-2022, 02:14 PM
hey greenhonn, good to see you are keen. But forget all what you have read, start with a good second hand .22 bolt. Shoot thousands of rounds through it, learn how to shoot and safely handle a...
Liked On: 08-07-2022, 10:08 PM
I think you would be better off starting with a good quality, accurate out the box .22 bolt action rimfire (not a 10/22). Cheap ammo, recoilless and quiet. You will learn the basics of marksmanship...
Liked On: 08-07-2022, 10:07 PM
In all fairness ... that inferior spring did last well over 120 years!
Liked On: 08-07-2022, 09:50 PM
Yep you really gotta watch .22's especially with subs, ricochets are common. Ok if you are in the middle of wide open spaces with no built up area or roads or anything around. But most of the...
Liked On: 06-07-2022, 09:03 AM
Those are very light loads for 2208 in a 303 case. It won't be developing enough preasure to burn it all. You need a faster powder to get complete burn with such light loads.
Liked On: 06-07-2022, 09:00 AM
Here you go. I will make a post for the home builds thread when I get some more pictures and progress. 200399 200400
Liked On: 05-07-2022, 10:28 PM
Copper tig welds really well, but welding with silfoss will be fine. If you get it hot enough in use to melt silfoss you’ll have other problems to worry about.
Liked On: 05-07-2022, 10:27 PM
You can fill it with sand and heat and bend, or use a plumbers spring if yo can find one of that diameter
Liked On: 05-07-2022, 10:26 PM
They are real easy to do when you know how. Simply assemble the magazine with the hex nut and screw removed and the spring sticking through the hole in the cover plate, hook the hex nut onto the...
Liked On: 05-07-2022, 08:48 AM