300MAG
Member

92 Likes

Page 4 of 7 First 1234567 Last

• Jump to page:

1. 
   PERRISCICABA liked post by 300MAG On thread : ELD-X 6.5

   These are different a-maxs says so on the box�� and the tip is a different colour - too scary to look at the cc slip

   Liked On: 06-03-2016, 12:21 PM

2. 
   veitnamcam liked post by 300MAG On thread : ELD-X 6.5

   For the disbelievers and conspiractists this is a hole new bullet .055 longer that old A-Max, loaded in a 6.5GAP and 6.5x284 loaded to suit T3 magnum mag. 46682

   Liked On: 06-03-2016, 12:13 PM

3. 
   Dead is better liked post by 300MAG On thread : ELD-X 6.5

   Had to change the seating depth from old a-max, further out by .05, shot in the same point of aim. Five round group old a-max chronographed at 3022fps SD 16 / ELD-X 5 round 3077fps SD 14 both...

   Liked On: 05-03-2016, 02:08 PM

4. 
   veitnamcam liked post by 300MAG On thread : ELD-X 6.5

   Had to change the seating depth from old a-max, further out by .05, shot in the same point of aim. Five round group old a-max chronographed at 3022fps SD 16 / ELD-X 5 round 3077fps SD 14 both...

   Liked On: 05-03-2016, 09:24 AM

5. 
   Puffin liked post by 300MAG On thread : ELD-X 6.5

   Had to change the seating depth from old a-max, further out by .05, shot in the same point of aim. Five round group old a-max chronographed at 3022fps SD 16 / ELD-X 5 round 3077fps SD 14 both...

   Liked On: 05-03-2016, 06:15 AM

6. 
   R93 liked post by 300MAG On thread : ELD-X 6.5

   Had to change the seating depth from old a-max, further out by .05, shot in the same point of aim. Five round group old a-max chronographed at 3022fps SD 16 / ELD-X 5 round 3077fps SD 14 both...

   Liked On: 04-03-2016, 10:07 PM

7. 
   mikee liked post by 300MAG On thread : ELD-X 6.5

   Had to change the seating depth from old a-max, further out by .05, shot in the same point of aim. Five round group old a-max chronographed at 3022fps SD 16 / ELD-X 5 round 3077fps SD 14 both...

   Liked On: 04-03-2016, 09:33 PM

8. 
   mikee liked post by 300MAG On thread : ELD-X 6.5

   These are different a-maxs says so on the box�� and the tip is a different colour - too scary to look at the cc slip

   Liked On: 04-03-2016, 04:22 PM

9. 
   sparky1000 liked post by 300MAG On thread : ELD-X 6.5

   Look what the courier dropped off this morning, just in time for those sika stags 46633

   Liked On: 04-03-2016, 02:42 PM

10. 
    Danny liked post by 300MAG On thread : ELD-X 6.5

    Look what the courier dropped off this morning, just in time for those sika stags 46633

    Liked On: 04-03-2016, 11:04 AM

11. 
    camo wsm liked post by 300MAG On thread : ELD-X 6.5

    Look what the courier dropped off this morning, just in time for those sika stags 46633

    Liked On: 04-03-2016, 10:37 AM

12. 
    deer243 liked post by 300MAG On thread : Fitted my new prototype carbonfiber stock

    Just finished fitting the new ultralight weight carbonfibre stock to my Tikka T3 6.5x284 Stock weight 604gms with a alloy v-bock (the v-block eliminates any need to bed the action, any T3...

    Liked On: 31-01-2016, 10:43 PM

13. 
    kiwijames liked post by 300MAG On thread : Fitted my new prototype carbonfiber stock

    Just finished fitting the new ultralight weight carbonfibre stock to my Tikka T3 6.5x284 Stock weight 604gms with a alloy v-bock (the v-block eliminates any need to bed the action, any T3...

    Liked On: 30-01-2016, 06:41 PM

14. 
    Bryan liked post by 300MAG On thread : Fitted my new prototype carbonfiber stock

    Just finished fitting the new ultralight weight carbonfibre stock to my Tikka T3 6.5x284 Stock weight 604gms with a alloy v-bock (the v-block eliminates any need to bed the action, any T3...

    Liked On: 27-01-2016, 11:03 AM

15. 
    veitnamcam liked post by 300MAG On thread : Fitted my new prototype carbonfiber stock

    Just finished fitting the new ultralight weight carbonfibre stock to my Tikka T3 6.5x284 Stock weight 604gms with a alloy v-bock (the v-block eliminates any need to bed the action, any T3...

    Liked On: 27-01-2016, 09:25 AM

Page 4 of 7 First 1234567 Last

• Jump to page: