40mm
Member

3357 Likes

Page 144 of 224 First ... 4494130131132133134135136137138139140141142143144145146147148149150151152153154155156157158194 ... Last

• Jump to page:

1. 
   40mm liked post by Marty Henry On thread : Users Guide to Adhesives

   Who would have thought that glue could be so riveting.

   Liked On: 27-05-2019, 07:50 AM

2. 
   40mm liked post by Cordite On thread : Users Guide to Adhesives

   So you think we can ask the mods for a sticky for this thread?

   Liked On: 27-05-2019, 07:50 AM

3. 
   40mm liked post by Marty Henry On thread : .303 reloads

   It sounds simple but this approach can be problematic. The projectile is fine its the powder where problems can begin. The russian round is designed for a shorter barrel than the 25 inch enfield so...

   Liked On: 21-05-2019, 09:19 PM

4. 
   40mm liked post by Max Headroom On thread : Carrying Ammo while Hunting with a Single Shot

   111729 Something like this sling might work.

   Liked On: 20-05-2019, 08:30 PM

5. 
   40mm liked post by Max Headroom On thread : Does a new air rifle get more accurate with use?

   With every rifle I bought I'd have a cold sweat moment: "Have I bought a lemon? this thing shoots like rubbish" Then I realised that it was just me getting used to the rifle. Air rifles are...

   Liked On: 19-05-2019, 07:43 PM

6. 
   40mm liked post by scotty On thread : How to start gunsmithing

   as you say your only 14.... so look for an engineering w/shop and ask if you can come sweep the floors after school.... theres your foot in the door when your ready to leave school you may have...

   Liked On: 19-05-2019, 10:48 AM

7. 
   40mm liked post by Sideshow On thread : How to start gunsmithing

   First up which will really help with your skill set is get some really good flat files and learn to file square ie flat to the surface. My gunsmith who is now a member of the gunmakers guild in...

   Liked On: 19-05-2019, 10:47 AM

8. 
   40mm liked post by timattalon On thread : How to start gunsmithing

   One gun smith I know was asked this question and his reply was; Find a trade that will help with Gun smithing. Something such as fitting / turning or fine engineering. etc. Use that as your trade and...

   Liked On: 19-05-2019, 10:47 AM

9. 
   40mm liked post by john m On thread : Carrying Ammo while Hunting with a Single Shot

   Dad put this on for Mum over 60 yrs ago and it's still usefull now. 111506

   Liked On: 18-05-2019, 07:26 PM

10. 
    40mm liked post by 2post On thread : Carrying Ammo while Hunting with a Single Shot

    I like the tube idea, how about a cheap 10 shot mag with a belt clip welded on? They are very easy to load (I load my 10/22 mag as I walk) and sliding one bullet off at a time would be easy. Also...

    Liked On: 18-05-2019, 07:23 PM

11. 
    40mm liked post by Maca49 On thread : Antique arms auctions

    Still time to get them into the Antique Arms Auction Ruahine Auction in Palm North

    Liked On: 17-05-2019, 07:42 AM

12. 
    40mm liked post by Luke556 On thread : Antique arms auctions

    Well generically,Few different types of Lee Enfields both FW & sporters , bunch of 22s, K98 etc I guess could chuck the FS here if some are keen

    Liked On: 17-05-2019, 07:41 AM

13. 
    40mm liked post by nzfubz On thread : rotary tumbler and SS media

    Made my own, if I could find the old thread there is mine and others home made jobs that may be an option?

    Liked On: 17-05-2019, 07:41 AM

14. 
    40mm liked post by Marty Henry On thread : Slugging

    Its difficult to hammer a jacketed round out of a barrel I know Ive had to!

    Liked On: 16-05-2019, 08:57 PM

15. 
    40mm liked post by tanqueray On thread : Slugging

    If it slides through too easily, there’s a chance that the bullet was too small, and although shows rifling, will not show the true groove diameter.

    Liked On: 16-05-2019, 08:57 PM

Page 144 of 224 First ... 4494130131132133134135136137138139140141142143144145146147148149150151152153154155156157158194 ... Last

• Jump to page: