Leupold or Nightforce and don’t look back :)
Liked On: 28-08-2022, 07:28 PM
Is this a CDS type turret, hence the 'remove the turrets'... and dial in for zero? Not familiar with Z5 sorry... Does it have a zero stop that needs moving / re zeroing?
Liked On: 28-08-2022, 07:28 PM
Houston we have a problem.
Liked On: 28-08-2022, 07:28 PM
First step is to set the adjustments to the optical axis of the scope. Make a scope holder like this: 204771 Apologies if it looks too big - ive uploaded the original file. Put the tube resting...
Liked On: 28-08-2022, 07:28 PM
Not to say this will solve it. Wuite rarely the scope base or rings are off skew but it has to be a long way off. Likecmismatched tings or a stepped action. Even rarer the barrel can be not straight...
Liked On: 28-08-2022, 07:27 PM
For what it's worth I take the turret off during zeroing as I has to be put back on lined up at the zero mark anyways
Liked On: 28-08-2022, 07:27 PM
You need to take the zero stop off, its in the instructions (cant tell you how, I sold mine)
Liked On: 28-08-2022, 07:11 PM
The freezer was empty of venison, so it was time for a hunt. I took advantage of a fine day and went for an afternoon/evening hunt. I haven't been out for a while so my fitness wasn't the best....
Liked On: 28-08-2022, 06:27 PM
poke 3 of them blue tip loads into paper next time you are out too...be VERY surprised if they arent grouping just as good.... great to see you have a load sorted.
Liked On: 28-08-2022, 06:09 PM
Nice. Reloaders Supplies have those 62 grn Hornady in bulk. $30/100 I think. They will do the business for you. I would be very happy at that.
Liked On: 28-08-2022, 02:30 PM
Rats on the lawnhttps://uploads.tapatalk-cdn.com/20220825/3d18e4075e0a577e0fb82a15f1f9ca02.jpg Sent from my Nokia X20 using Tapatalk
Liked On: 26-08-2022, 01:33 PM
Those ones of mine are optilock without insert.
Liked On: 25-08-2022, 09:57 PM
I'm using: 15 in.lb for the 4 small screws hold the top of the ring to the bottom 2.5mm Hex 25 in.lb for the single cross screw holding the ringmount onto the rail 4mm Hex 40 in.lb for bedding...
Liked On: 25-08-2022, 09:40 PM
well just like the chronigraph can make you doubt your nice accurate load thinking that you need to use a torque wrench to do up scope rings is the same...Ive never had a scope move in rings...and...
Liked On: 25-08-2022, 08:57 PM
For a 7mm Mag you would want to weld the scope on wouldn't you :)
Liked On: 25-08-2022, 08:37 PM