7mmsaum
Caretaker

6911 Likes

Page 128 of 461 First ... 2878114115116117118119120121122123124125126127128129130131132133134135136137138139140141142178228 ... Last

• Jump to page:

1. 
   JohnDuxbury liked post by 7mmsaum On thread : Best Product for Bedding a Rifle?

   Devcon 10110 2 part epoxy and stainless-steel powder Coloured black Zero shrink, machinable For repairing magnesium gearbox housings on helicopters etc

   Liked On: 03-06-2023, 09:58 AM

2. 
   20 Bore liked post by 7mmsaum On thread : Best Product for Bedding a Rifle?

   Devcon 10110 2 part epoxy and stainless-steel powder Coloured black Zero shrink, machinable For repairing magnesium gearbox housings on helicopters etc

   Liked On: 03-06-2023, 09:09 AM

3. 
   shift14 liked post by 7mmsaum On thread : Best Product for Bedding a Rifle?

   Devcon 10110 2 part epoxy and stainless-steel powder Coloured black Zero shrink, machinable For repairing magnesium gearbox housings on helicopters etc

   Liked On: 03-06-2023, 08:41 AM

4. 
   dannyb liked post by 7mmsaum On thread : Best Product for Bedding a Rifle?

   Devcon 10110 2 part epoxy and stainless-steel powder Coloured black Zero shrink, machinable For repairing magnesium gearbox housings on helicopters etc

   Liked On: 03-06-2023, 04:29 AM

5. 
   TimC liked post by 7mmsaum On thread : Minimum pack contents

   I have enjoyed the company of a warm fire on those occasions I wasn’t intending spending the night :) What always amazes me is how big the “ clearing” is in the morning once everything near me...

   Liked On: 01-06-2023, 09:46 PM

6. 
   Bol Tackshin liked post by 7mmsaum On thread : whats needed when hunting the south island

   Post of the week right here :) :) :)

   Liked On: 01-06-2023, 08:40 AM

7. 
   dannyb liked post by 7mmsaum On thread : What tikka to purchase

   Yep 308 Use same ammo for everything so you build familiarity

   Liked On: 31-05-2023, 11:59 PM

8. 
   25/08 IMP liked post by 7mmsaum On thread : Tumbler or Sonic cleaner

   Stainless pins in a wet tumbler makes brass shinier than new Dry, then graphite powder the necks

   Liked On: 29-05-2023, 04:47 PM

9. 
   dannyb liked post by 7mmsaum On thread : Tumbler or Sonic cleaner

   Stainless pins in a wet tumbler makes brass shinier than new Dry, then graphite powder the necks

   Liked On: 29-05-2023, 05:41 AM

10. 
    BSA270 liked post by 7mmsaum On thread : Using comparator tool when seating projectiles.

    Use cotton buds to wipe graphite powder on the inside of case necks and on projectiles Fingers stay clean then

    Liked On: 28-05-2023, 10:28 PM

11. 
    BSA270 liked post by 7mmsaum On thread : Using comparator tool when seating projectiles.

    Zimmers method is perfect Seat 10 thou too long them measure with the comparator Write that number down if you need to Then adjust the micrometer seating stem down for the last amount ...

    Liked On: 28-05-2023, 10:27 PM

12. 
    Woody liked post by 7mmsaum On thread : Using comparator tool when seating projectiles.

    Zimmers method is perfect Seat 10 thou too long them measure with the comparator Write that number down if you need to Then adjust the micrometer seating stem down for the last amount ...

    Liked On: 28-05-2023, 07:19 PM

13. 
    Moa Hunter liked post by 7mmsaum On thread : Using comparator tool when seating projectiles.

    Zimmers method is perfect Seat 10 thou too long them measure with the comparator Write that number down if you need to Then adjust the micrometer seating stem down for the last amount ...

    Liked On: 28-05-2023, 06:47 PM

14. 
    BSA liked post by 7mmsaum On thread : Using comparator tool when seating projectiles.

    Use cotton buds to wipe graphite powder on the inside of case necks and on projectiles Fingers stay clean then

    Liked On: 28-05-2023, 04:25 PM

15. 
    BSA liked post by 7mmsaum On thread : Using comparator tool when seating projectiles.

    Zimmers method is perfect Seat 10 thou too long them measure with the comparator Write that number down if you need to Then adjust the micrometer seating stem down for the last amount ...

    Liked On: 28-05-2023, 04:24 PM

Page 128 of 461 First ... 2878114115116117118119120121122123124125126127128129130131132133134135136137138139140141142178228 ... Last

• Jump to page: