For an NZ .375 I’d go with a Vx3i 3.5-10 cds. You will probably be using it past 200yds so the magnification and dialling will be an advantage. At the Big Bore shoot Harry was easily ringing the...
Liked On: 10-05-2020, 12:45 PM
1-5x20 vx3i with CDS, sorted.
Liked On: 10-05-2020, 12:44 PM
162 is the optimum weight in 7mm mag. You don’t gain enough by going to 180gr. What you gain in BC you lose in velocity and extra recoil. To really get the advantage of 180’s you need more case size....
Liked On: 09-05-2020, 09:18 AM
Doesnt it like being photographed?
Liked On: 09-05-2020, 08:57 AM
Pretty much anything I brought from Hunting and Fishing
Liked On: 06-05-2020, 10:54 PM
Currently, Tikka. Greatest number in circulation, Remington Highest number getting ignored and dusty, LE
Liked On: 06-05-2020, 10:56 AM
No not really. Faster powder for shorter barrels is a wide spread belief but its a myth, its not how internal ballistics work. The best burn rate for max velocity is dictated by the cartridge and...
Liked On: 01-05-2020, 07:43 PM
Because the price of my freedom was not free . Great Uncle of mine buried in belgium might have a different view of hardship! 3 more weeks around home or 3 years on the westend front! pretty sure...
Liked On: 26-04-2020, 12:54 AM
Ones with nylon inserts are less likely to crush your tube,Burris signature and the likes.
Liked On: 25-04-2020, 08:12 PM
Ive tried them all, endlessly poured over ballistic charts and spent a small fortune. But if I want to make certain stuff stays dead I use my 300saum every time (pretty much the same as the...
Liked On: 25-04-2020, 05:34 PM
I drilled out my Hornady 6.5CM seating stem with a 3.5mm drill bit in a cordless drill. 143gr ELD-X no longer had their tips flattened. Easy. I know i could have bought another stem for ELDs, but i...
Liked On: 25-04-2020, 05:27 PM
You can deepen the centre of the seating stem with a lathe -- but just as readily with a drill press. 1. Put 3mm drill into drill press the wrong way, cutting end up. 2. Lower drill bit down to...
Liked On: 25-04-2020, 05:26 PM
Do the same thing at end of the day mate, ones short and ones long. Can both be cut down to 20/22inches. Can both be loaded with lites or heavys. Both good weapons
Liked On: 25-04-2020, 09:47 AM
I don't see a tactical chassis ever being good for hunting.
Liked On: 24-04-2020, 09:58 PM
Not a rifle but a scope I regret moving on. A Luepy vari-x III 3.5-10x50...I had the reticle changed to a Luepold Dot and had an M1 turret installed on the elevation. It cost $1300 which at the time...
Liked On: 23-04-2020, 09:56 PM