7x64
Member

221 Likes

Page 14 of 15 First 123456789101112131415 Last

• Jump to page:

1. 
   nevereadyfreddy liked post by 7x64 On thread : What happened ????

   I would pick it's the case, and loose primer pocket too. Certainly not too hot, you couldn't stuff enough 2206h in a 223 case to really get in trouble. You would need a considerably faster powder to...

   Liked On: 27-12-2016, 10:29 PM

2. 
   mikee liked post by 7x64 On thread : What happened ????

   I would pick it's the case, and loose primer pocket too. Certainly not too hot, you couldn't stuff enough 2206h in a 223 case to really get in trouble. You would need a considerably faster powder to...

   Liked On: 27-12-2016, 10:31 AM

3. 
   deepsouthaussie liked post by 7x64 On thread : What happened here?

   Primer pockets too deep, causing primers not to be seated properly to ignite? I suspect they look weird because there was no pressure to seat them back as they didn't go bang. That and you used...

   Liked On: 12-12-2016, 07:43 AM

4. 
   timattalon liked post by 7x64 On thread : Gunshops upper north island with good shotgun selections

   I was pointed to a shotgun "expert" at hunting and thieving one day "erp, derp, dis one made in Italian, but dis one made in murica" was about as much as he could offer. I didn't stay long... ...

   Liked On: 26-11-2016, 09:29 AM

5. 
   rockland liked post by 7x64 On thread : Dead kiwi not tested for 1080

   I think if you haven't worked out 1080 and the Graf brothers in the same sentence is almost certainly nonsense, I'm guessing you're about to renew your subscription to "Truth"...

   Liked On: 12-11-2016, 02:53 PM

6. 
   BRADS liked post by 7x64 On thread : Dead kiwi not tested for 1080

   I think if you haven't worked out 1080 and the Graf brothers in the same sentence is almost certainly nonsense, I'm guessing you're about to renew your subscription to "Truth"...

   Liked On: 12-11-2016, 11:35 AM

7. 
   gimp liked post by 7x64 On thread : Dead kiwi not tested for 1080

   I think if you haven't worked out 1080 and the Graf brothers in the same sentence is almost certainly nonsense, I'm guessing you're about to renew your subscription to "Truth"...

   Liked On: 12-11-2016, 10:27 AM

8. 
   kiwijames liked post by 7x64 On thread : Donuts in 243 necks

   Personally I wouldn't mess with brass with an unknown history. Is it really worth the hassle? And I thought I was tight! :D

   Liked On: 11-07-2016, 09:35 PM

9. 
   WallyR liked post by 7x64 On thread : Donuts in 243 necks

   Personally I wouldn't mess with brass with an unknown history. Is it really worth the hassle? And I thought I was tight! :D

   Liked On: 11-07-2016, 09:29 PM

10. 
    WallyR liked post by 7x64 On thread : .224 40-50gr wanted, swap for 55gr hornady, or 150gr 30cal sst

    Just want a few lighter ones to play with. Struggling with load development with what I have on hand, so if anyone has some light stuff surplus... A few other bits and pieces lying around for...

    Liked On: 01-07-2016, 05:56 PM

11. 
    steven liked post by 7x64 On thread : best reloading manual

    Tons of info put there, use multiple sources and cross check. I.e. Sierra data is generally quite mild compared to say hodgdon /adi. Check out the downloads section on here too, some older manuals...

    Liked On: 13-06-2016, 08:15 PM

12. 
    mikee liked post by 7x64 On thread : best reloading manual

    Tons of info put there, use multiple sources and cross check. I.e. Sierra data is generally quite mild compared to say hodgdon /adi. Check out the downloads section on here too, some older manuals...

    Liked On: 12-06-2016, 10:23 AM

13. 
    57jl liked post by 7x64 On thread : Best brass?

    I despise hornady brass. It seems to vary hugely from OK to complete and utter garbage depending on the batch. Go and buy some Lapua or Norma and save yourself a huge amount of headaches. I would...

    Liked On: 24-05-2016, 09:42 PM

14. 
    shooternz liked post by 7x64 On thread : Best brass?

    I despise hornady brass. It seems to vary hugely from OK to complete and utter garbage depending on the batch. Go and buy some Lapua or Norma and save yourself a huge amount of headaches. I would...

    Liked On: 15-04-2016, 03:39 PM

15. 
    steven liked post by 7x64 On thread : Best brass?

    I despise hornady brass. It seems to vary hugely from OK to complete and utter garbage depending on the batch. Go and buy some Lapua or Norma and save yourself a huge amount of headaches. I would...

    Liked On: 15-04-2016, 01:04 PM

Page 14 of 15 First 123456789101112131415 Last

• Jump to page: