andyanimal31
Member

1987 Likes

Page 115 of 133 First ... 1565101102103104105106107108109110111112113114115116117118119120121122123124125126127128129 ... Last

• Jump to page:

1. 
   veitnamcam liked post by andyanimal31 On thread : The best bar none bore cleaner!

   I have read articles researching the above with eliminator my first foray into cleaners and then progressed to kg12 which i thought was a revelation for copper. Then came along this...

   Liked On: 21-02-2015, 08:13 PM

2. 
   Scouser liked post by andyanimal31 On thread : Thoughts on Tikka m595

   The good things about the 595/695 series are their accurracy and finish but last but not least when you run out of ammo you can club the animal to death with out damaging the rifle!

   Liked On: 18-02-2015, 12:37 PM

3. 
   300CALMAN liked post by andyanimal31 On thread : Thoughts on Tikka m595

   The good things about the 595/695 series are their accurracy and finish but last but not least when you run out of ammo you can club the animal to death with out damaging the rifle!

   Liked On: 17-02-2015, 06:07 PM

4. 
   Hunt4life liked post by andyanimal31 On thread : Thoughts on Tikka m595

   The good things about the 595/695 series are their accurracy and finish but last but not least when you run out of ammo you can club the animal to death with out damaging the rifle!

   Liked On: 17-02-2015, 03:35 PM

5. 
   BRADS liked post by andyanimal31 On thread : New hunting S&B scope

   I better not put one of those on my .22 or there could be a divorce!

   Liked On: 14-02-2015, 09:17 PM

6. 
   res liked post by andyanimal31 On thread : New hunting S&B scope

   I just sit back and pick up good second hand highend optics at the price of medium but still good gear. Once you have the best glass it is bloody hard to go back

   Liked On: 14-02-2015, 02:58 PM

7. 
   DAF liked post by andyanimal31 On thread : New hunting S&B scope

   I just sit back and pick up good second hand highend optics at the price of medium but still good gear. Once you have the best glass it is bloody hard to go back

   Liked On: 14-02-2015, 02:40 PM

8. 
   BRADS liked post by andyanimal31 On thread : New hunting S&B scope

   I just sit back and pick up good second hand highend optics at the price of medium but still good gear. Once you have the best glass it is bloody hard to go back

   Liked On: 14-02-2015, 02:12 PM

9. 
   BRADS liked post by andyanimal31 On thread : Powder trickler advice

   Sorry i explained it wrong as i know my weights from the dispenser are right i dont cross check them at all except the first after a quick calbrate. Probably spitting out 50 rounds in half an hour...

   Liked On: 14-02-2015, 01:38 PM

10. 
    BRADS liked post by andyanimal31 On thread : Powder trickler advice

    I presume you are precision benchrest or xtreme long range shooting for that much fidling around. I cross check my hornady auto load against my beam scale and they are spot on. I beleive .1 of a...

    Liked On: 14-02-2015, 10:17 AM

11. 
    Dougie liked post by andyanimal31 On thread : Concentricity

    I concur vc I shot some groups at 600 with some dead straight ammo and some with 10 thou run out. The straight group was 3 inches and the bent 3.5 inch so yep the concentricity guage is now...

    Liked On: 13-02-2015, 12:03 AM

12. 
    Woody liked post by andyanimal31 On thread : Concentricity

    I concur vc I shot some groups at 600 with some dead straight ammo and some with 10 thou run out. The straight group was 3 inches and the bent 3.5 inch so yep the concentricity guage is now...

    Liked On: 10-02-2015, 10:02 AM

13. 
    PERRISCICABA liked post by andyanimal31 On thread : Concentricity

    I just measure between the olgive and the neck with the hornady gauge. I occasionally check now but usually 0 to 3 thou run out on my 6.5 using bushing neck dies which is close enough for me. The...

    Liked On: 08-02-2015, 12:35 PM

14. 
    kiwi39 liked post by andyanimal31 On thread : Concentricity

    I just measure between the olgive and the neck with the hornady gauge. I occasionally check now but usually 0 to 3 thou run out on my 6.5 using bushing neck dies which is close enough for me. The...

    Liked On: 07-02-2015, 11:06 PM

15. 
    Beaker liked post by andyanimal31 On thread : Concentricity

    I just measure between the olgive and the neck with the hornady gauge. I occasionally check now but usually 0 to 3 thou run out on my 6.5 using bushing neck dies which is close enough for me. The...

    Liked On: 07-02-2015, 09:12 PM

Page 115 of 133 First ... 1565101102103104105106107108109110111112113114115116117118119120121122123124125126127128129 ... Last

• Jump to page: