ANTSMAN
Member

837 Likes

Page 44 of 56 First ... 303132333435363738394041424344454647484950515253545556 Last

• Jump to page:

1. 
   ANTSMAN liked post by Smiddy On thread : 300wsm- 20/22 inch Tikka with 178 eldx

   Been down the path of exotic powders, now just use adi, 20in bbl 2920fps with 2209, not as quick as the exotic stuff but pretty bloody close

   Liked On: 23-04-2020, 11:53 PM

2. 
   ANTSMAN liked post by Cooper On thread : 300wsm- 20/22 inch Tikka with 178 eldx

   In terms of common threads there is the choice of 14x1 or 9/16x24 unless you want to go smaller which I would not do. Barrel diameter is too small to fit a 5/8x24 thread on Mine is threaded 14x1...

   Liked On: 23-04-2020, 03:06 PM

3. 
   ANTSMAN liked post by Sako85 On thread : 300wsm- 20/22 inch Tikka with 178 eldx

   Not sure what is considered Ideal, all mine are threaded 14x1 with barrel lengths ranging from 24, 22, 20 and 18 inches

   Liked On: 23-04-2020, 03:06 PM

4. 
   ANTSMAN liked post by Tahr On thread : 300wsm- 20/22 inch Tikka with 178 eldx

   14x1 on mine. Recommended by Max.

   Liked On: 23-04-2020, 03:04 PM

5. 
   ANTSMAN liked post by stug On thread : Level 3 hunting ban lifted - only on private land

   https://www.stuff.co.nz/national/health/coronavirus/121209323/coronavirus-level-3-ban-on-hunting-lifted A ban on hunting under Covid-19 alert level 3 has been lifted. Hunters will be able to...

   Liked On: 23-04-2020, 12:25 PM

6. 
   ANTSMAN liked post by Sako85 On thread : 300wsm- 20/22 inch Tikka with 178 eldx

   Correction on the 178 ELDX load its 64.5 grains RL 17 for 2950 typo error sorry, data on the targets is correct.

   Liked On: 22-04-2020, 10:47 PM

7. 
   ANTSMAN liked post by Gibo On thread : Vx5 2-10 CDS Question

   2 budgies ;)

   Liked On: 22-04-2020, 03:34 PM

8. 
   ANTSMAN liked post by Sako85 On thread : 300wsm- 20/22 inch Tikka with 178 eldx

   Have a bit of data for H100V, gave good results for accuracy and velocity also, and was going to be an option for me if I couldn’t get Reloader 17.

   Liked On: 21-04-2020, 02:35 PM

9. 
   ANTSMAN liked post by Sako85 On thread : 300wsm- 20/22 inch Tikka with 178 eldx

   All of the loads are Seated to fit Mag, its a warm load if I use Norma Brass I drop the charge 2grains

   Liked On: 21-04-2020, 02:10 PM

10. 
    ANTSMAN liked post by Sako85 On thread : 300wsm- 20/22 inch Tikka with 178 eldx

    Tikka 20 inch 300 wsm load data and chronographed over lab radar. Winchester Cases Fed / 215 Magnum Primer 168 Amax 66.5 grains RL 17 3050 178 Eldx 65.5 grains RL 17 2950 190 Berger VLD 62...

    Liked On: 21-04-2020, 01:54 PM

11. 
    ANTSMAN liked post by 300wsm for life On thread : 300wsm- 20/22 inch Tikka with 178 eldx

    200gr ELD X in my 300wsm 61.5gr RL17 2940fps 22in barrel Given as a comparison, you should get a bit faster with the 178g.

    Liked On: 21-04-2020, 01:15 PM

12. 
    ANTSMAN liked post by Tahr On thread : 300wsm- 20/22 inch Tikka with 178 eldx

    All good. You will be hanging out to get it. 3 weeks should see you good anyway.

    Liked On: 21-04-2020, 12:34 PM

13. 
    ANTSMAN liked post by 25 /08 IMP On thread : 300wsm- 20/22 inch Tikka with 178 eldx

    I have just been through this loading for a mates rifle which is a 20" shooting 178 ELDM I tried Hodgdon superprofrmance and RL26. I only kept the info from the finished loads Hodgdon...

    Liked On: 21-04-2020, 11:28 AM

14. 
    ANTSMAN liked post by Tahr On thread : 300wsm heavies

    This is a .30 cal 150TTSX @ 300 yds. 3150 fps. They work just fine up close. In the vid it looks like I hit it a bit back but I was angling for where I wanted the bullet to go. It went right...

    Liked On: 20-04-2020, 05:48 PM

15. 
    ANTSMAN liked post by Pommy On thread : 300wsm heavies

    300WSM is a bit like 284 in the sense that it's designed to work in a short action but it really comes alive when you can seat the bullets back out towards long action lengths. With that in mind,...

    Liked On: 20-04-2020, 01:17 PM

Page 44 of 56 First ... 303132333435363738394041424344454647484950515253545556 Last

• Jump to page: