Bol Tackshin
Member

1610 Likes

Page 11 of 108 First 1234567891011121314151617181920212223242561 ... Last

• Jump to page:

1. 
   Bol Tackshin liked post by 7mmsaum On thread : Still making mistake's ....

   Not everything drops like a stone when you shoot it - but it bloody helps when it does !! 237779

   Liked On: 24-11-2023, 07:45 AM

2. 
   Bol Tackshin liked post by Williamfga On thread : 300 PRC to 7mm PRC

   Just get a .270? beats the 7prc hands down

   Liked On: 23-11-2023, 02:26 PM

3. 
   Bol Tackshin liked post by blip On thread : Boat Trailer Maintenance Time

   A guy I know carries a spare hub with bearings seal and nut washer and split pin as well as a spare when ever hes going for some distance with his trailer. Seems like a good idea..

   Liked On: 23-11-2023, 02:16 PM

4. 
   Bol Tackshin liked post by 7mmsaum On thread : Filling open grain on stock on the cheap

   It will be a mix of sika blood, then add sweat and tears :)

   Liked On: 21-11-2023, 08:26 PM

5. 
   Bol Tackshin liked post by Micky Duck On thread : Filling open grain on stock on the cheap

   the oil,any oil will help.....drying out over the years will have shrunk wit hwood,allowing cracks to open. sounds like your on to it.

   Liked On: 21-11-2023, 08:21 PM

6. 
   Bol Tackshin liked post by The bomb On thread : Good light(er)weight boot for river flats/private land?

   “Keen “ brand of boots are pretty good.

   Liked On: 20-11-2023, 02:20 PM

7. 
   Bol Tackshin liked post by Lucky On thread : Make the Most of it when your Young

   Was watching a Youtube clip last night with a couple of fellas Hunting in Fiordland, it was fantastic scenery and hunting footage, and I thought to myself, to there is no way I could lug a big pack...

   Liked On: 15-11-2023, 09:10 PM

8. 
   Bol Tackshin liked post by No.3 On thread : tidy up crown on .22lr

   If doing the abrasive method, a 3m earplug inserted level with the muzzle works as a really easy plug. Doesn't get in the way, and keeps the abrasive paste where it should be. Push it out with a...

   Liked On: 15-11-2023, 08:38 AM

9. 
   Bol Tackshin liked post by apkiwi On thread : tidy up crown on .22lr

   Funnily enough I was picking up some supplies on Sunday to do this very thing, had a hand me down .22 semi with a bulge and a ring in the barrel. Hacksawed the barrel after work yesterday, filed...

   Liked On: 14-11-2023, 07:46 PM

10. 
    Bol Tackshin liked post by Kelton On thread : Blooding the new .308

    The .308s being busy the past two weekends talking 4 red deer and one good size fallow absolute joy to use and being back to basics shorting off the shoulder at the shoulder with no rangefinders has...

    Liked On: 09-11-2023, 10:51 PM

11. 
    Bol Tackshin liked post by norsk On thread : WTF Bubba

    Running a nice heavy bead with a Arc welder along the left side of the barrel might sort out the bend.Few slaps with a hammer on the bulge after a bit of Oxy on the bump followed by a "rattle-can"...

    Liked On: 09-11-2023, 10:44 PM

12. 
    Bol Tackshin liked post by dannyb On thread : WTF Bubba

    Yup it's rough, but advertised honestly, I really don't see the issue. Bought plenty of rifles advertised less honestly that weren't through that "certain seller" Plenty of sub par rifles get...

    Liked On: 09-11-2023, 10:43 PM

13. 
    Bol Tackshin liked post by No good names left On thread : WTF Bubba

    5/8"-24 with thread tape, whats to bet the surpresor was M16x1

    Liked On: 09-11-2023, 10:43 PM

14. 
    Bol Tackshin liked post by blip On thread : WTF Bubba

    Cmon guys its only my first custom gun build.....

    Liked On: 09-11-2023, 10:42 PM

15. 
    Bol Tackshin liked post by chainsaw On thread : Learning to Fly Fish

    Get some casting lessons

    Liked On: 09-11-2023, 07:37 PM

Page 11 of 108 First 1234567891011121314151617181920212223242561 ... Last

• Jump to page: