Hi Guys. finally got some work done on a paulownia stock for a Sako Finnbear. in the past I have carbon wrapped a few, but it accepts resin so well I'm going to try 3 coats of resin and no carbon, so...
Liked On: 09-02-2023, 10:42 AM
A bathtub floor that you can trust not to let dampness seep through and substantial enough to withstand the odd dog claw.
Liked On: 09-02-2023, 08:11 AM
I have 2 of the ai versions. Fastest powder is RL 26. I use 22 and 23 in one of my rifles to Dave 26. H1000 also gets good reviews and I've just bought 2209 to use in my shorter barrel one as that...
Liked On: 08-02-2023, 09:44 PM
A good mate Nick has just moved back to the Hawkes Bay after 3 years living away in the SI. He's all out of veni, he'd even eaten a whole rear leg that I gave him 10 days ago off the last one I shot...
Liked On: 05-02-2023, 10:01 AM
Headed to a CNI river today to make the most of the fine weather. Cicadas were in full voice, nothing screams dry fly action as much as hot weather and Cicadas chirping away, ended the day with 8...
Liked On: 02-02-2023, 08:13 AM
Nice to see that Tahr, now it's clear that you don't have to give your keys to staff. I was thinking it rather irresponsible to give your keys to someone who may be unlicensed.
Liked On: 31-01-2023, 08:29 AM
Probably would have better off packing a set of oars!
Liked On: 31-01-2023, 08:28 AM
The actual operation of setting the barrel back and rechambering is no problem. The breech end would need to be set back by 0.230" (the effective difference in case bodies) which is 3.68 threads, but...
Liked On: 30-01-2023, 06:05 PM
In terms of power there is not a lot of difference between the two cartridges. The 7mm PRC has the ability to throw heavier bullets by virtue of the fast twist barrel. Rechambering your 7mm Rem Mag...
Liked On: 30-01-2023, 09:18 AM
1in9 works for most 180gr projectiles, so don't see why a 1in9.5 which most 7mm barrels are won't work at magnum velocity. But I'd be chatting to a gunsmith about rechambering Let alone the wait...
Liked On: 29-01-2023, 05:58 PM
I am taking the same route but with a 28 nosler . Rechambering a new Remington barrel first and seeing how that thing shoots. I might keep the same caliber on the next tube or jump to theprc if...
Liked On: 29-01-2023, 05:57 PM
I know of one person,who had one firearm stolen. the story is worth retelling..... about 10 years ago this young fella went hunting in wet crappy conditions,so when he got home,rifle got whipe over...
Liked On: 28-01-2023, 08:52 AM
Hi all, Hopefully this is the right place for this post. I’ve developed a bit of a Cerakoting hobby over the last year. My original plan was to only do my own firearms and car parts but...
Liked On: 27-01-2023, 07:20 PM
Here's another example: 215511 The results speak for themselves although I'll be testing the indicated depth with a couple of 10 shot groups. it also pays to observe the shift in point of...
Liked On: 27-01-2023, 06:20 PM
I would be really careful with ropes as people tend to push limits in order to access country or recover an animal and that's when murphy shows up! No animal is worth it... if the animal isn't in...
Liked On: 27-01-2023, 02:13 PM