chainsaw
Member

4177 Likes

Page 65 of 279 First ... 155152535455565758596061626364656667686970717273747576777879115165 ... Last

• Jump to page:

1. 
   chainsaw liked post by gonetropo On thread : DIY replacement battery for ResQLink PLB

   post pic of battery i suggest batterycell in welly batterymasta in christchurch dunno who does them in auckland i did a plb ages back, was a 2213 (i went lithium) and it costed me $28

   Liked On: 08-03-2023, 10:28 AM

2. 
   chainsaw liked post by 6.5 CRD On thread : Lead Contamination In Game Meat

   Something a few of you may find quite interesting, Take from it what you will. Bit of back story - my partner who i have got into hunting/shooting & recently just shot her first deer, and being the...

   Liked On: 06-03-2023, 07:50 PM

3. 
   chainsaw liked post by Scott Cowan On thread : Carbon stock build BrnoZkk 500g target

   Here goes another Paulownia Carbon wrap build. Finished shaping the stock blank today. Weight 375g and counting. Refining my process a bit. Have a Sako 75 and Finnbear on the go will post picks once...

   Liked On: 06-03-2023, 06:21 PM

4. 
   chainsaw liked post by Scott Cowan On thread : light weight Sako stock build.... is it light enough yet?

   so i should have made it lighter... because i ended up carbon wrapping it. ill post the whole build soon when i get the final finish on it. but here where im up2

   Liked On: 05-03-2023, 08:28 PM

5. 
   chainsaw liked post by Scott Cowan On thread : Another Paulownia CF stock build

   heres where im upto with a sako finnbear. 510g at present

   Liked On: 05-03-2023, 08:09 PM

6. 
   chainsaw liked post by XR500 On thread : April Fools get together - Central North Island

   February is almost done and dusted, and as we met quite a few GC's at the first open home here outside of Kinloch, I thought I'd offer up our farm again for a bit of a get together prior to Easter,...

   Liked On: 28-02-2023, 09:41 PM

7. 
   chainsaw liked post by stug On thread : Another Paulownia CF stock build

   Rich007 chainsaw an R8 stock would be doable but would need to be a bit inventive. The chassis insert wouldn’t be too much of a problem with a router/mill. It is mainly rectangular. The rear bolt...

   Liked On: 28-02-2023, 09:11 PM

8. 
   chainsaw liked post by Fat belly Dog On thread : Another Paulownia CF stock build

   Have you tried using vacuum bagging for the epoxy, you can make a cheap set up using an old fridge compressor, I use to make kite and surf boards out of paulownia with fliers and fish tails and the...

   Liked On: 28-02-2023, 09:10 PM

9. 
   chainsaw liked post by zeropak On thread : Suppressor rear bush sizing

   Yep I get that. solid consistent contact or no contact at all should work. But partial or variable contact would most likely cause accuracy issues.

   Liked On: 28-02-2023, 08:28 AM

10. 
    chainsaw liked post by Fssprecision On thread : Suppressor rear bush sizing

    Needs to be a good clearance, quite often the bore is not concentric to the outside of the barrel, you don't want the bush trying to tip the suppressor.

    Liked On: 28-02-2023, 08:27 AM

11. 
    chainsaw liked post by Gibo On thread : Another Paulownia CF stock build

    Or 1200 wet n dry sand paper to take the sheen off

    Liked On: 28-02-2023, 07:49 AM

12. 
    chainsaw liked post by woods223 On thread : Complaint about Arms Amendment Regulations 2022

    Thought I’d post this up from NZ Sporting Shooters. Wasn’t sure how many would follow links so copied all to here. Remember, this affects us all. Dear Sporting Shooters, Attached is a letter...

    Liked On: 25-02-2023, 09:57 AM

13. 
    chainsaw liked post by Kiwihunter On thread : SIG Sierra Tango BDX 3-18x44 any one running one of these?

    I have the sig sierra 6 bdx 3-18X44 combined with the kilo 3000 binos. Used it a bit and it works very well and quick. Shot a goat at 470m after getting the drop sorted out beforehand and a few deer...

    Liked On: 24-02-2023, 07:39 AM

14. 
    chainsaw liked post by whanahuia On thread : Picked up new rifle today.

    Yes. The last new rifle I bought was 28years ago- A BRNO 600 in same calibre. It was my go too rifle for all that time. I decided I deserved another one rifle/scope combo for everything before I got...

    Liked On: 23-02-2023, 08:38 PM

15. 
    chainsaw liked post by camenzie On thread : SIG Sierra Tango BDX 3-18x44 any one running one of these?

    I don’t have the scope but use a SIG 300 bdx bino/range finder. I understand the BDX system and interface is standardised across all of their products. It works really well for me. Connects to the...

    Liked On: 23-02-2023, 08:26 PM

Page 65 of 279 First ... 155152535455565758596061626364656667686970717273747576777879115165 ... Last

• Jump to page: