chainsaw
Member

2743 Likes

Page 27 of 183 First ... 131415161718192021222324252627282930313233343536373839404177127 ... Last

• Jump to page:

1. 
   dannyb liked post by chainsaw On thread : Another Paulownia CF stock build

   My second effort, this one for a REM Model 7 708. Pretty much copy of Model 7 factory stock but with a longer LOP to suit the shooter (long arms) plus a slightly raised comb and a check swell. ...

   Liked On: 26-02-2023, 10:07 AM

2. 
   rupert liked post by chainsaw On thread : . 284 Winchester

   Interesting comps Puffin on 284 vs 280ai - my real word experience aligns closely with the QL model data but with different powders needed to get optimal results. I did a lot of background...

   Liked On: 25-02-2023, 03:04 PM

3. 
   HoppyV8 liked post by chainsaw On thread : 6.5 x 55 alternative powder to Vihtavuori N560

   Know doubt 2209 works, but burn rate of N560 is slower than 2209, much more like 2213SC and a Superformance and RL22

   Liked On: 24-02-2023, 05:47 PM

4. 
   SikaHuntaa liked post by chainsaw On thread : Best Fit bino harness for Swaro EL 10x42 binos

   Just give your Swaro ELs to me, problem solved.:ORLY:

   Liked On: 24-02-2023, 12:55 PM

5. 
   whanahuia liked post by chainsaw On thread : Picked up new rifle today.

   Very nice, ya lucky bugger

   Liked On: 24-02-2023, 09:42 AM

6. 
   Beaker liked post by chainsaw On thread : Lure making

   Too pretty to toss at some toothie critter :thumbsup:

   Liked On: 17-02-2023, 08:50 PM

7. 
   Gibo liked post by chainsaw On thread : Lure making

   Too pretty to toss at some toothie critter :thumbsup:

   Liked On: 17-02-2023, 01:54 PM

8. 
   Scott Cowan liked post by chainsaw On thread : light weight Sako stock build.... is it light enough yet?

   Nice Scott, great to another Paulownia & CF stock coming together. I’m at more or less the same stage with the stock weighing in at 424g after final shaping & bedding done. The LimbSaver adds about...

   Liked On: 10-02-2023, 10:06 PM

9. 
   Moa Hunter liked post by chainsaw On thread : light weight Sako stock build.... is it light enough yet?

   Nice Scott, great to another Paulownia & CF stock coming together. I’m at more or less the same stage with the stock weighing in at 424g after final shaping & bedding done. The LimbSaver adds about...

   Liked On: 10-02-2023, 02:48 PM

10. 
    BSA270 liked post by chainsaw On thread : 162 ELD-M close range performance 284win

    Too frangible for up close on big animal at that speed. Personally I’d run a cheap cup n core like your Interloks for that.

    Liked On: 09-02-2023, 08:51 PM

11. 
    lau lau liked post by chainsaw On thread : 162 ELD-M close range performance 284win

    Too frangible for up close on big animal at that speed. Personally I’d run a cheap cup n core like your Interloks for that.

    Liked On: 09-02-2023, 01:16 PM

12. 
    Scott Cowan liked post by chainsaw On thread : 6.5mm-06 Loads Advice

    I found RL25 best in my 6506ai (24in bbl) running 140gn AMAX. 2980 fps with Norma brass & 2950 fps with RP brass. Had initially tried 2213 & RL19, velocities were anemic. 2217 was better but RL25...

    Liked On: 08-02-2023, 08:33 PM

13. 
    Micky Duck liked post by chainsaw On thread : 162 ELD-M close range performance 284win

    Too frangible for up close on big animal at that speed. Personally I’d run a cheap cup n core like your Interloks for that.

    Liked On: 08-02-2023, 05:20 PM

14. 
    dannyb liked post by chainsaw On thread : 162 ELD-M close range performance 284win

    Too frangible for up close on big animal at that speed. Personally I’d run a cheap cup n core like your Interloks for that.

    Liked On: 08-02-2023, 02:02 PM

15. 
    Moa Hunter liked post by chainsaw On thread : 6.5mm-06 Loads Advice

    I found RL25 best in my 6506ai (24in bbl) running 140gn AMAX. 2980 fps with Norma brass & 2950 fps with RP brass. Had initially tried 2213 & RL19, velocities were anemic. 2217 was better but RL25...

    Liked On: 07-02-2023, 06:16 PM

Page 27 of 183 First ... 131415161718192021222324252627282930313233343536373839404177127 ... Last

• Jump to page: