charliehorse
Member

997 Likes

Page 11 of 67 First 1234567891011121314151617181920212223242561 ... Last

• Jump to page:

1. 
   Bhess liked post by charliehorse On thread : Bush hobbiting

   Its pretty obvious, I can see you've listed them with the 270 first, so subconsciously you've already made your mind up:cool:

   Liked On: 07-10-2023, 07:18 AM

2. 
   yeah_na_missed liked post by charliehorse On thread : Bush hobbiting

   Its pretty obvious, I can see you've listed them with the 270 first, so subconsciously you've already made your mind up:cool:

   Liked On: 06-10-2023, 09:54 PM

3. 
   Bhess liked post by charliehorse On thread : Bush hobbiting

   Knocking those 3 over in one go would have been a good buzz, would have been a heavy carry out. What's your bang stick?

   Liked On: 06-10-2023, 04:54 PM

4. 
   Slug liked post by charliehorse On thread : Genex small rifle primers

   Tried these today for something to do. Usually use CCI 400 under the 20g Vmax in my 17H. They were a little tighter to seat as per internet findings. Was confident enough to just run the usual load...

   Liked On: 06-10-2023, 10:38 AM

5. 
   Mooseman liked post by charliehorse On thread : Genex small rifle primers

   Tried these today for something to do. Usually use CCI 400 under the 20g Vmax in my 17H. They were a little tighter to seat as per internet findings. Was confident enough to just run the usual load...

   Liked On: 04-10-2023, 08:27 PM

6. 
   Nasty Factory Trigger liked post by charliehorse On thread : Genex small rifle primers

   Tried these today for something to do. Usually use CCI 400 under the 20g Vmax in my 17H. They were a little tighter to seat as per internet findings. Was confident enough to just run the usual load...

   Liked On: 03-10-2023, 05:44 PM

7. 
   Muttonguts liked post by charliehorse On thread : What magnification are you running in the bush?

   X3 works fine for me. Shot a pig on the run yesterday in the bush. If you already have the x2 then you don't really have a problem, you can put it on with no extra cost when ever you like.

   Liked On: 18-08-2023, 09:58 PM

8. 
   Micky Duck liked post by charliehorse On thread : FL resized rounds wont chamber

   I had this problem recently with 1 x fired brass not in my gun. I tested pre sizing and it wouldn't even run up into the chamber, so I stripped my bolt and proceeded to set my redding die by testing...

   Liked On: 13-08-2023, 05:12 AM

9. 
   Micky Duck liked post by charliehorse On thread : What magnification are you running in the bush?

   X3 works fine for me. Shot a pig on the run yesterday in the bush. If you already have the x2 then you don't really have a problem, you can put it on with no extra cost when ever you like.

   Liked On: 12-08-2023, 01:02 PM

10. 
    7mm tragic liked post by charliehorse On thread : What magnification are you running in the bush?

    X3 works fine for me. Shot a pig on the run yesterday in the bush. If you already have the x2 then you don't really have a problem, you can put it on with no extra cost when ever you like.

    Liked On: 12-08-2023, 10:35 AM

11. 
    woods223 liked post by charliehorse On thread : What magnification are you running in the bush?

    X3 works fine for me. Shot a pig on the run yesterday in the bush. If you already have the x2 then you don't really have a problem, you can put it on with no extra cost when ever you like.

    Liked On: 12-08-2023, 10:10 AM

12. 
    Kiwilad2021 liked post by charliehorse On thread : Genex small rifle primers

    Tried these today for something to do. Usually use CCI 400 under the 20g Vmax in my 17H. They were a little tighter to seat as per internet findings. Was confident enough to just run the usual load...

    Liked On: 11-08-2023, 09:47 PM

13. 
    rupert liked post by charliehorse On thread : Genex small rifle primers

    Tried these today for something to do. Usually use CCI 400 under the 20g Vmax in my 17H. They were a little tighter to seat as per internet findings. Was confident enough to just run the usual load...

    Liked On: 10-08-2023, 06:21 PM

14. 
    ElDax liked post by charliehorse On thread : Genex small rifle primers

    Tried these today for something to do. Usually use CCI 400 under the 20g Vmax in my 17H. They were a little tighter to seat as per internet findings. Was confident enough to just run the usual load...

    Liked On: 10-08-2023, 05:37 PM

15. 
    Micky Duck liked post by charliehorse On thread : Genex small rifle primers

    Tried these today for something to do. Usually use CCI 400 under the 20g Vmax in my 17H. They were a little tighter to seat as per internet findings. Was confident enough to just run the usual load...

    Liked On: 10-08-2023, 05:11 PM

Page 11 of 67 First 1234567891011121314151617181920212223242561 ... Last

• Jump to page: