Just a quick one, need to do some tree trimming around the house so knocked this up. Power hacksaw blade, turns out they are M2 HSS which means I cant heat treat it but its probably not a bad...
Liked On: 01-11-2018, 07:32 PM
948229482494825
Liked On: 11-09-2018, 01:49 PM
Almost done, I need to make a spacer to go between the wood work and the back of the suppressor tube, because of the angle on the back of this it needs to be relived at the front so it can be taken...
Liked On: 11-09-2018, 01:49 PM
948229482494825
Liked On: 10-09-2018, 09:58 PM
Almost done, I need to make a spacer to go between the wood work and the back of the suppressor tube, because of the angle on the back of this it needs to be relived at the front so it can be taken...
Liked On: 10-09-2018, 09:58 PM
Almost done, I need to make a spacer to go between the wood work and the back of the suppressor tube, because of the angle on the back of this it needs to be relived at the front so it can be taken...
Liked On: 10-09-2018, 09:37 PM
Well it looks promising.... Sides cut out and folded, the patterns were printed from the models above and stuck on with a glue stick then cut out with a jig saw, the guide plates were made in the...
Liked On: 04-09-2018, 08:25 PM
Back to the fun of a magazine, a slight change of plan here (no not buying a Saiga one yet). The Enfield mag well is too narrow to fit a double stack and not rim lock. So instead of grinding out the...
Liked On: 04-09-2018, 08:25 PM
And all the front end bits 93948
Liked On: 27-08-2018, 10:17 PM
The plan had been to have a go at rust bluing all of the steel bits. Like most things this did not go to plan, possibly from my dubious acid solution but more likely form using our now nicely...
Liked On: 27-08-2018, 10:16 PM
Little bit more, bit of wood with some carbon 89517 Then roughed out with an angle grinder, thats a legitimate wood work tool right? Actually a flap disc worked really well 89518 And...
Liked On: 27-08-2018, 09:53 PM
End usage so far is having something that is more interesting to do than watch tv in the evenings, Im only putting it up now because I have a cold and dont feel like welding that shitty exhaust...
Liked On: 27-08-2018, 09:43 PM
End usage so far is having something that is more interesting to do than watch tv in the evenings, Im only putting it up now because I have a cold and dont feel like welding that shitty exhaust...
Liked On: 27-08-2018, 09:42 PM
This is kind of a carry on from the magazine thread which has kind of ground to a halt while this bit gets done. For starters the hardest bit has been getting the barrel out of the receiver, that was...
Liked On: 27-08-2018, 09:40 PM
The magazine is almost done, piece welded to the back with a notch for the release/catch and a pad on each side of the magazine to fill out some of the space and hold the magazine straighter. New...
Liked On: 27-08-2018, 03:28 PM