https://uploads.tapatalk-cdn.com/20190826/46c94a6d22f2a0affefeaedebf45362d.jpg Gday 300Rum ive been putting together for a while Fired a few rounds the other night with good results Sent from...
Liked On: 28-08-2019, 05:13 PM
I have bought a couple of Sakos with my PonyTokens, both of which need rings (25mm). Not being familiar with these things, I see they require a specific sort of ring which I do not possess in my box...
Liked On: 28-08-2019, 01:02 PM
Nice long mags in a LA Sako
Liked On: 28-08-2019, 12:18 PM
COAL is 92 mm.
Liked On: 28-08-2019, 12:16 PM
I run a FB group for the 7mm Rem SAUM, theres a couple of yankie guys on there been posting about some awesome velocities they are getting with 180-195gr bullets from long barreled 7mmSAUM's. 195's...
Liked On: 28-08-2019, 09:58 AM
As it happens I had my new 7 Rem Mag out today for the first time for zeroing and barrel break in. Specs are: Borden Timberline magnum action. Bartlein 2b barrel at 25” and 8.7 twist with a T2...
Liked On: 28-08-2019, 09:55 AM
A straight 7=300 is easy to form. 300 wm through a die with appropriate bushing. I seat with 300 wm Redding die with 7mm stem. It’s so easy. If you don’t have the dies already something else may be...
Liked On: 27-08-2019, 10:41 PM
Nathan Fosters 7mm Practical also changes the shoulder angle. You can make brass by necking down 300 win mag brass, but then need to just neck size unless you get a custom die made. Other option...
Liked On: 27-08-2019, 10:41 PM
What about 7mm dakota or 7mm stw? I think the brass is not so easy to come by but certainly got potential. But maybe it will be a bit of a pickle. In that it'll be a case of decreasing returns...
Liked On: 27-08-2019, 10:41 PM
I think dies are as simple as using a Redding S type 300wm FL die with a bush for the neck, change the bush out for the appropriate 7mm bush, not 100% sure on the seater but a universal 7mm seater...
Liked On: 27-08-2019, 09:13 PM
Just to keep this going I’m going to build one Should be fun and informative
Liked On: 27-08-2019, 08:45 PM
Sako
Liked On: 27-08-2019, 08:38 PM
Talk to Grant, he has built a few now :)
Liked On: 27-08-2019, 06:37 PM
A straight neck down on 300wm Sent from my SM-G930P using Tapatalk
Liked On: 27-08-2019, 06:36 PM
What about a 7mm Practical (7mm-300WM) It should do what you want easy. Cheap and easily available brass. It'll put you much closer to the ballistics of your 338LM Without the expense of...
Liked On: 27-08-2019, 06:21 PM