ChrisW
Member

822 Likes

Page 27 of 55 First ... 1314151617181920212223242526272829303132333435363738394041 ... Last

• Jump to page:

1. 
   Russian 22. liked post by ChrisW On thread : What front rest do you use at the range

   I use an Atlas PSR Bipod. Nothing wrong with the Harris bipods though. Of importance, imo, is if you get a bipod that can swivel side to side, make sure it can be tightened up real good so it...

   Liked On: 24-10-2019, 12:30 PM

2. 
   Tussock liked post by ChrisW On thread : Is it time to leave the 27 gang?

   If projectile manufacturers properly supported .270 it could be very good. It sits between 6.5 and 7mm, so projectile manufactures should be able to make projectiles with a bc in between that of the...

   Liked On: 24-10-2019, 09:40 AM

3. 
   stevodog liked post by ChrisW On thread : Is it time to leave the 27 gang?

   If projectile manufacturers properly supported .270 it could be very good. It sits between 6.5 and 7mm, so projectile manufactures should be able to make projectiles with a bc in between that of the...

   Liked On: 24-10-2019, 09:36 AM

4. 
   Tussock liked post by ChrisW On thread : Is it time to leave the 27 gang?

   .270 is a diameter neglected by projectile manufacturers. 7mm has a much better choice of efficient projectiles.

   Liked On: 23-10-2019, 11:49 AM

5. 
   Steve123 liked post by ChrisW On thread : Anyone with experience returning NZ with firearms

   A bit more background would help. Are you just coming for a hunt with the intention of taking the firearms back to your own country? Are you immigrating here and want to bring your firearms with...

   Liked On: 21-10-2019, 05:43 AM

6. 
   SlimySquirrel liked post by ChrisW On thread : Anyone with experience returning NZ with firearms

   A bit more background would help. Are you just coming for a hunt with the intention of taking the firearms back to your own country? Are you immigrating here and want to bring your firearms with...

   Liked On: 17-10-2019, 07:58 AM

7. 
   Marty Henry liked post by ChrisW On thread : Anyone with experience returning NZ with firearms

   A bit more background would help. Are you just coming for a hunt with the intention of taking the firearms back to your own country? Are you immigrating here and want to bring your firearms with...

   Liked On: 16-10-2019, 10:52 AM

8. 
   Moa Hunter liked post by ChrisW On thread : Interested in people's thoughts on the 8mm mauser

   Hard hitting caliber. Suitable factory ammo for hunting may be expensive/hard to find. Would better suit a reloader, but the caliber in general will certainly get the job done. Id put it beside...

   Liked On: 15-10-2019, 08:50 AM

9. 
   stagstalker liked post by ChrisW On thread : 7mm mag and 180gr ELDM

   Na I didnt, I shot the odd few at the same target (69 and 69.5 went in the same hole) but I was cleaning in between shots and also adjusting scope to sight it in at the same time so there was not...

   Liked On: 14-10-2019, 11:46 PM

10. 
    stagstalker liked post by ChrisW On thread : 7mm mag and 180gr ELDM

    I got out yesterday morning to break in the new barrel, and while I was at it try to get some meaningful data out of the process. I loaded up 14 rounds using AR2225 with the 180ELDX seated way...

    Liked On: 14-10-2019, 08:19 PM

11. 
    Jaco Goosen liked post by ChrisW On thread : First reloads

    Many of the most accurate shooters will full-length size with a shoulder bump of only about 2thou. This achieves the benefits of neck sizing only, in that the brass fits the chamber pretty much...

    Liked On: 14-10-2019, 06:50 PM

12. 
    Micky Duck liked post by ChrisW On thread : Blending powders

    Personally, id do it. I don't go as far as bothering with batch numbers of powder, or primers.

    Liked On: 14-10-2019, 06:40 PM

13. 
    Russian 22. liked post by ChrisW On thread : First reloads

    Many of the most accurate shooters will full-length size with a shoulder bump of only about 2thou. This achieves the benefits of neck sizing only, in that the brass fits the chamber pretty much...

    Liked On: 14-10-2019, 05:25 PM

14. 
    stevodog liked post by ChrisW On thread : Tikka mag COAL

    No probs. FYI if you don't have the book - at 83.566 COAL with IMR4831, Hornady's start load is 51.7gr and max is 60.6gr.

    Liked On: 14-10-2019, 01:38 PM

15. 
    hthomas liked post by ChrisW On thread : Interested in people's thoughts on the 8mm mauser

    Hard hitting caliber. Suitable factory ammo for hunting may be expensive/hard to find. Would better suit a reloader, but the caliber in general will certainly get the job done. Id put it beside...

    Liked On: 14-10-2019, 12:29 PM

Page 27 of 55 First ... 1314151617181920212223242526272829303132333435363738394041 ... Last

• Jump to page: