https://www.youtube.com/watch?v=vWGquxvqI_Y Makes my fingers nervous, that thing needs to be dismantled!
Liked On: 24-02-2019, 09:21 PM
6.5x55 is hamstrung in all the manuals and factory loaders because of all the old actions that could shit themselves with a proper load, loaded hard in a modern action the Swede has legs that would...
Liked On: 24-02-2019, 09:51 AM
That's great! Its a wonderful thing to have sympathy for your quarry. Never be ashamed to shed a tear or have an emotional lump in your throat about things you respect or love.
Liked On: 23-02-2019, 10:01 PM
So today was a very exciting day for me today as my brother borrow a rifle so we could look for a deer we got to our area just on light a walked over a ridge in to a scrubby gully we sat down to...
Liked On: 23-02-2019, 09:55 PM
Ha, ha... nice to see my old rifle being used well! Well done :thumbsup:
Liked On: 23-02-2019, 05:10 PM
I have had a .50 cal Muzzleloader now for a couple of years and have been working towards getting my first game animals with it. After replacing the factory open sights with a ghost ring / globe...
Liked On: 23-02-2019, 05:08 PM
Ummm 105607
Liked On: 23-02-2019, 05:05 PM
Marty, i got a couple of oak stock blanks from an old mate who cut down a tree where i took the blanks, oiled the ends and put them in the back of the garage to slowly dry out and yes... sure enough...
Liked On: 22-02-2019, 11:37 PM
I load black powder cartridges without sizing the necks at all. If you chamber a fired case, and slip fit the bullet in then you are good. If you can chamber the rounds your good. The size of your...
Liked On: 22-02-2019, 10:58 PM
As long as the rounds chamber freely you are ok, cases spring back a few thou after firing if they didn't they would stick in the chamber, The problem with sizing dies is that they size the necks...
Liked On: 22-02-2019, 10:58 PM
I've had a rifle with a crown cut like that and I should mention that it is to this day the most accurate rifle I've ever owned. If the rifles shoots good, keep it, otherwise have someone crown it...
Liked On: 21-02-2019, 04:00 PM
terryf . Get an address and send the knife to him please. pm me a bank account number Camgibbler, get a new cousin
Liked On: 20-02-2019, 09:05 AM
I made the offer once before so I'll make it again to Camgibbler I have an M390 Custom hunting knife I'll let you have for $100 plus a Nitecore HC65 for $100 The knifes RRP is $300 and the...
Liked On: 20-02-2019, 09:04 AM
bacho.....cheap as chips,sharp as a razor,will do the job very nicely.sheath wont let you down inside your pack if you sit on it. mercator folder in pocket as back up.job done.
Liked On: 20-02-2019, 09:04 AM
Mercator folder about $50 carbon steel razor sharp, always goes with me no matter what, I have some fancier knives but the mercator will do everything I need. The pretty knives are just a magpie...
Liked On: 20-02-2019, 09:03 AM