Cordite
Member

4507 Likes

Page 75 of 301 First ... 256162636465666768697071727374757677787980818283848586878889125175 ... Last

• Jump to page:

1. 
   Cordite liked post by ebf On thread : Grease not oil on bolt actions?

   You'd be surprised by the level of "genius" out there... I know of at least a couple of target barrels ruined by guys waiting for a "clean" patch while using an abrasive polish like JB paste...

   Liked On: 25-06-2021, 10:25 PM

2. 
   Cordite liked post by On thread : Grease not oil on bolt actions?

   All my rifles are sighted in with clean bores given first shot placement certainty fits all practical applications. There are so many gun-friendly products available it takes a special genius to...

   Liked On: 25-06-2021, 10:25 PM

3. 
   Cordite liked post by Bol Tackshin On thread : Grease not oil on bolt actions?

   It amazes me that you are amazed. You should know by now that when you have two shooters, for any given topic, there will be at least three opinions! ;)

   Liked On: 25-06-2021, 10:12 PM

4. 
   Cordite liked post by Tertle On thread : 303 accuracy

   I will try and upload the images as it looks like they have not come across from the way back machine, i have the original article somewhere as i kept everything (somewhere) just in case i decided to...

   Liked On: 25-06-2021, 10:09 PM

5. 
   Cordite liked post by Micky Duck On thread : 12ga shotgun slugs

   yes the trick is to find CORRECT sized ball....

   Liked On: 25-06-2021, 10:01 PM

6. 
   Cordite liked post by Matt-P.Nth On thread : Bubba what have you done?

   Your in luck 137792 Just got my gunsmithing tools ready

   Liked On: 25-06-2021, 12:06 PM

7. 
   Cordite liked post by Ruger On thread : Bubba what have you done?

   If you can clearly see that the safety has been removed, then one would assume the correct approach would be to carry this rifle with the action open, or bolt closed on an empty chamber. Both...

   Liked On: 25-06-2021, 11:59 AM

8. 
   Cordite liked post by gadgetman On thread : Bubba what have you done?

   I have only ever used the safety to lock the bolt down on an empty chamber.

   Liked On: 25-06-2021, 11:58 AM

9. 
   Cordite liked post by shooternz On thread : .303 Cast bullets

   Hi Guy's I have bought a new mould for the .303 It casts a 210 grain bullet .314" with a .304" nose only have a few hundred due to Gas Checks being unavailable at present Get in touch if you...

   Liked On: 24-06-2021, 11:43 PM

10. 
    Cordite liked post by Jhon On thread : SMLE 303

    One thing to remember with the 303, the bolt locks with lugs at the rear. If you take a video of the bolt as it fires you will see it bends quite appreciably under the pressure load of firing a...

    Liked On: 24-06-2021, 11:39 PM

11. 
    Cordite liked post by dogmatix On thread : SMLE 303

    For $151 you wont lose much if its a lemon. Now go out and shoot and enjoy it. :D

    Liked On: 24-06-2021, 07:22 PM

12. 
    Cordite liked post by Smallfoot On thread : 12ga shotgun slugs

    Ideally you want to use a snail, over a slug. Better shell.

    Liked On: 19-06-2021, 02:55 PM

13. 
    Cordite liked post by Brian On thread : 12ga shotgun slugs

    Here's my one. Haven't fired it for a while but it will put a slug from each barrel 2 inches apart at 60 yds. 20 in barrels. https://i.ibb.co/ZKLr0nW/sh002.jpg (https://imgbb.com/)

    Liked On: 19-06-2021, 02:52 PM

14. 
    Cordite liked post by thejavelin On thread : 12ga shotgun slugs

    I went through a phase of all kind of crazy testing in my younger years. Loads of wax/pellet slugs and the like - most interesting though, 15mm socket actually makes a good mould for a pretty decent...

    Liked On: 19-06-2021, 02:51 PM

15. 
    Cordite liked post by On thread : super short vs short barrel?

    not fully into shotguns but in my limited experience I've found longer barrel ones shoot better...

    Liked On: 19-06-2021, 01:13 PM

Page 75 of 301 First ... 256162636465666768697071727374757677787980818283848586878889125175 ... Last

• Jump to page: