csmiffy
Member

3681 Likes

Page 110 of 246 First ... 106096979899100101102103104105106107108109110111112113114115116117118119120121122123124160210 ... Last

• Jump to page:

1. 
   csmiffy liked post by Ftx325 On thread : Ruger Marlins

   If there's one thing a 45/70 needs it's definitely a loudner .... :ORLY::wtfsmilie:

   Liked On: 20-01-2022, 05:02 PM

2. 
   csmiffy liked post by Micky Duck On thread : Phil-h

   he doing great,heading off tonight to shoot a couple of deer...in process of buying the king of all calibres,a mighty .270win probably in a howa..... good choice.LOL.

   Liked On: 19-01-2022, 06:28 PM

3. 
   csmiffy liked post by akaroa1 On thread : Mauser feeding and floorplate

   Sorry csmiffy I found who it the hoard and both were broken one one leaf missing !

   Liked On: 19-01-2022, 05:14 PM

4. 
   csmiffy liked post by FRST On thread : Mauser feeding and floorplate

   Polish only, emery paper etc. That ridge is actually essential as you push the cartridge forward it directs the round to a more central path towards the breech. As the mauser does not have coned...

   Liked On: 18-01-2022, 06:00 PM

5. 
   csmiffy liked post by Ground Control On thread : Lever Action Back From The Dead

   I haven't been very active here for a while due to the fact that Australia -NZ travel has been next to impossible for the last 2 years and I haven't been back to our place in the Marlborough Sounds...

   Liked On: 16-01-2022, 07:04 PM

6. 
   csmiffy liked post by ANTSMAN On thread : Bergara ba13 I Duracoted

   so got some of this stuff in Rhodesian green, cos its different, and cool :) Read the instructions many times over and waited a couple weeks to let it sink in. Still made some mistakes, like...

   Liked On: 16-01-2022, 04:35 PM

7. 
   csmiffy liked post by Micky Duck On thread : A few 308 questions.

   DO NOT get rid of them.....I have one loaded factory round left that gets used to set up my dies. how many in box??? I will swap you for 125grn tnt .308s one for one

   Liked On: 16-01-2022, 04:32 PM

8. 
   csmiffy liked post by gundoc On thread : Better accuracy for my 308

   A 100 metre group under 2 MOA is perfectly acceptable for hunting. 1 MOA or better is target shooting territory!

   Liked On: 16-01-2022, 04:29 PM

9. 
   csmiffy liked post by Moa Hunter On thread : Mauser feeding and floorplate

   Changing the step height on the follower can make a huge difference to how the rounds are presented to the chamber. I have two rifles converted from med 7x57 length to long and in both cases the...

   Liked On: 16-01-2022, 11:34 AM

10. 
    csmiffy liked post by Micky Duck On thread : Mauser feeding and floorplate

    170grn mate...the 160s were lapua megas,bought from belmont 25ish years ago...they were good too LOL.

    Liked On: 16-01-2022, 08:34 AM

11. 
    csmiffy liked post by garyp On thread : Mauser feeding and floorplate

    Got a spare follower and spring here if you want to try them

    Liked On: 16-01-2022, 08:33 AM

12. 
    csmiffy liked post by Moa Hunter On thread : Mauser feeding and floorplate

    I suggest that the angle on the floor plate needs changed and possibly the height of the step. As a test, try a piece of insulation tape around the spring at a zigzag bend to compress the bend and...

    Liked On: 16-01-2022, 08:33 AM

13. 
    csmiffy liked post by HandH On thread : Mauser feeding and floorplate

    Yup don’t take anything off the rails, you can’t put it back!!! I also have spare springs and followers…

    Liked On: 15-01-2022, 10:47 PM

14. 
    csmiffy liked post by gundoc On thread : Mauser feeding and floorplate

    Smiffy, in your photo you can see a wee kink on the uphill leg close to the centre bend. Straighten that out by hand which will lift the front of the follower. You can also put an upward bend on the...

    Liked On: 15-01-2022, 10:33 PM

15. 
    csmiffy liked post by bunji On thread : Photos your proud of -not just hunting

    Beautiful clear water & great visibility & the Bach's Deep Blu Supermarket bursting at the seams with top quality Kai. 187962

    Liked On: 15-01-2022, 07:23 PM

Page 110 of 246 First ... 106096979899100101102103104105106107108109110111112113114115116117118119120121122123124160210 ... Last

• Jump to page: