csmiffy
Member

3681 Likes

Page 163 of 246 First ... 63113149150151152153154155156157158159160161162163164165166167168169170171172173174175176177213 ... Last

• Jump to page:

1. 
   csmiffy liked post by timattalon On thread : Basspro & Cabelas - Phoenix, Arizona

   I believe it is because they are specifically a gun store and their space dedicated to firearms is bigger than any others? Cabellas and Bass pro are sports stores rather than gunshops. Bass pro looks...

   Liked On: 08-04-2020, 06:01 PM

2. 
   csmiffy liked post by gundoc On thread : Self isolation gun projects

   That looks like a Chevy fan pulley to me!

   Liked On: 08-04-2020, 04:55 PM

3. 
   csmiffy liked post by jakewire On thread : 35 Whelen

   Yeah. seems accurate some when in between my 30 06 and 9.3 x62.but with good distance/trajectory on the 9.3 { not better though} Probably go for a 220 -225 bullet been thinking bout it for a long...

   Liked On: 07-04-2020, 09:18 PM

4. 
   csmiffy liked post by Beavis On thread : Walnut and blued steel,

   Husky 1600 in 30/06. Picked it up just before the lockdown. 135322

   Liked On: 07-04-2020, 09:16 PM

5. 
   csmiffy liked post by Marty Henry On thread : 6.5 Creedmoor advice

   End of the day to your choice all of them will do what your "design parameters" are some might be marginally better in one aspect or another but there's no clear winner. If sticking to factory ammo ...

   Liked On: 07-04-2020, 08:35 AM

6. 
   csmiffy liked post by Finnwolf On thread : Self isolation gun projects

   Same deal installing a cast iron 390 intake manifold while the motor is in the car.

   Liked On: 06-04-2020, 05:06 PM

7. 
   csmiffy liked post by Gibo On thread : Short deer/pig/goat rifles for the tight stuff (lets see em)

   Incorrect, his rifle was well over-length for this particular thread, he is banished to his lounge for 3 weeks :P

   Liked On: 06-04-2020, 01:43 PM

8. 
   csmiffy liked post by Bol Tackshin On thread : More advise wanted re finishing a stock

   4th coat of tung-linseed blend oil. The synthetic steel wool worked a treat. 135118

   Liked On: 05-04-2020, 03:21 PM

9. 
   csmiffy liked post by redrover On thread : canjar set trigger instructions

   Email sent.

   Liked On: 05-04-2020, 03:03 PM

10. 
    csmiffy liked post by Seventenths On thread : Short deer/pig/goat rifles for the tight stuff (lets see em)

    Here's one of my Ruger .44 magnum's I used to own, had a few over the years https://i.ibb.co/dWj8MXt/IMG-4846.jpg It was a 10/22 on steroids and hit like the hammer of Thor with a 240 gr XTP ...

    Liked On: 05-04-2020, 03:02 PM

11. 
    csmiffy liked post by grandpamac On thread : 30 cal magnum musings

    Greetings Again, C&B would be Collings and Brady and 1 in 11 inch twist. I've seen stamping like that on a barrel Din fitted in the 90's. Your description of the alterations to the bolt face sounded...

    Liked On: 05-04-2020, 02:56 PM

12. 
    csmiffy liked post by gundoc On thread : More advise wanted re finishing a stock

    +1 on Tergo Strip! Do not use any sandpaper at all as it will round off the edges and the fact that the stock has been refinished by an amateur will stick out like dog's balls! A carefully used...

    Liked On: 05-04-2020, 11:57 AM

13. 
    csmiffy liked post by Sideshow On thread : Red dot for a rimfire.

    The picture shows a high mount but it will mount low. Which is brillant for lever actions and bolt. So when you fast shotgun mount your eye will come straight down the barrel. As you can see from the...

    Liked On: 05-04-2020, 11:53 AM

14. 
    csmiffy liked post by Boxton On thread : Best place for rabbit shooting on West Coast?

    Not sure who owns it all now but used to walk from the scout camp to the arahura river along the sand dunes and fence lines and shoot pleanty

    Liked On: 05-04-2020, 11:51 AM

15. 
    csmiffy liked post by mudgripz On thread : More advise wanted re finishing a stock

    Dan - I tend to use sandpapers from med to superfine finishing grades (1200) to remove old varnish and prep surfaces. Don't touch the checkering with paper. Wire brush may be fine if its old. Then...

    Liked On: 05-04-2020, 07:46 AM

Page 163 of 246 First ... 63113149150151152153154155156157158159160161162163164165166167168169170171172173174175176177213 ... Last

• Jump to page: