I've often just loaded up my new mags with spent cases to free up the springs etc to make loading easier Sent from my SM-G935F using Tapatalk
Liked On: 26-05-2018, 12:12 PM
4.30-6.00, so that rules out about 90% of people who actually work for a living, Typical civil service organisation.
Liked On: 26-05-2018, 12:09 PM
It's deliberate. They get to day they did their consultation w while minimizing the type of comment they know they will get
Liked On: 26-05-2018, 12:09 PM
When I flew for Rusts float plane services off lake hood in Anchorage,we did a lot of moose hunts,always had a guide....my job,fly in and out,....get poo paper,gut fish,pack moose...etc...
Liked On: 26-05-2018, 12:02 PM
Just had a Model 1 Brno redone by Alan Carr- nice work. This thing was a bit pitted and the whole action/mag a bit gummy from age/use. He sorted the lot for less than $400
Liked On: 26-05-2018, 11:56 AM
@double_shot does ceracoting I haven't had it done but it looks bloody good, or you could get a can of the blue steel stuff and paint it on yourself.... I did a 10/22 with the spray can, worked well...
Liked On: 25-05-2018, 09:47 PM
The most of the improvements were been done one at a time and sighted in afterwards as it is first and foremost a hunting gun. The biggest improvement was stabilising and bedding the stock then the...
Liked On: 25-05-2018, 09:42 PM
hahaha -no need to tell me about so called consultation -im a health professional -frontline -constantly subjected to consultations by spotty wee tertiary educated herberts who push the bosses...
Liked On: 25-05-2018, 09:32 PM
That will be a great experience guiding, if I was a bit younger that would be an ace job. My moose hunt in 2002 cost me $ 6900 US with an exchange rate of .42 cents US for our dollar so it was...
Liked On: 25-05-2018, 09:30 PM
You would definitely be a cock juggler to shoot a Fiordland Moose. If I ever seen one I think I would keep amongst friends. Going public would cause all sorts of problems I reckon. I am a...
Liked On: 25-05-2018, 09:30 PM
Probably the only way I could have scored some ducks on opening morning. Camo it up with cotton wool?
Liked On: 24-05-2018, 08:53 PM
Yes, put it into writing. Danger is that "consultations" will otherwise be able to get abused in a cherry picking manner to push through predetermined agendas/"conclusions". Sorry, this is an...
Liked On: 24-05-2018, 08:45 PM
Im thinking 9/16 x? need the tips of the caliper on the tippy top of the threads to get the pitch, set caliper to 1/2" and see if it lines up neat on ten threads.... then it would be 9/16x20
Liked On: 24-05-2018, 08:14 PM
FN M98 sporting rifles were manufactured with stepped barrels in the 60's and 70's.
Liked On: 24-05-2018, 06:56 PM
Mate... not at all .. totally agree....,the previous poster wrote the obvious,I was merely being feceious.....when it comes to guns (especially)in the US.... as with several of there other...
Liked On: 24-05-2018, 06:55 PM