csmiffy
Member

3169 Likes

Page 71 of 212 First ... 215758596061626364656667686970717273747576777879808182838485121171 ... Last

• Jump to page:

1. 
   csmiffy liked post by Jhon On thread : Loaded Rifle

   At the NZDA Hunter Training Course a couple of winters past I learned something moot. I too grew up on a 303 SMLE with a half open bolt. What I learned was a Mauser action can still fire on half...

   Liked On: 13-03-2022, 04:19 PM

2. 
   csmiffy liked post by Moa Hunter On thread : Help - stuck bolt

   Padox, I feel that in the interests of personal safety you should cease using the rifle immediately and to help you out, I will come down to Tarras with the 2506AI and shoot the Fallow bucks for you...

   Liked On: 13-03-2022, 01:16 PM

3. 
   csmiffy liked post by Finnwolf On thread : Making my irons more visible in the bush

   As I mentioned in another old thread: I squished a bit of silver paper over my Finnwolf fore site to make it more visible in late evening in bush, mostly when sitting as the risk of it getting swept...

   Liked On: 13-03-2022, 09:28 AM

4. 
   csmiffy liked post by garyp On thread : Help - stuck bolt

   Squirt a few drops of oil down the muzzle leave upright for an hour then tap with a piece of wood or plastic headed hammer. Or tap a cleaning rod down the barrel. Good luck.

   Liked On: 13-03-2022, 09:18 AM

5. 
   csmiffy liked post by Beaker On thread : Making my irons more visible in the bush

   I've got some of that glow powder here. Pm a postal address and you can have some to try, if you want

   Liked On: 12-03-2022, 03:24 PM

6. 
   csmiffy liked post by Tahr On thread : Hammer Damage

   Back of the neck at 200. Ouch. They are the most effective bullet I have ever used but ruin a lot of meat. I’ve got some 64 grn coming for the .223. They were comparatively expensive but with the...

   Liked On: 11-03-2022, 06:42 PM

7. 
   csmiffy liked post by Tahr On thread : Hammer Damage

   124 grn 6.5 prc Hammer bullet. 3100 fps. 150 yards. You can see the shank exit and 3 petal exits above it. The petals fly off and the shank always seems to exit. 192102

   Liked On: 11-03-2022, 06:42 PM

8. 
   csmiffy liked post by Mathias On thread : Gun shop recommendations - Christchurch

   Shooters is a short walk from my work, been in a few times & they are really helpful friendly people. Sent from my SM-A530F using Tapatalk

   Liked On: 11-03-2022, 06:42 PM

9. 
   csmiffy liked post by m101a1 On thread : f/s 303 projs and cases

   Unopened box of 180 gr hcrn speers and 42 once fired cases 20 fed and rest hornady I think $ 100 prefer pickup porirua

   Liked On: 10-03-2022, 07:51 PM

10. 
    csmiffy liked post by outdoorlad On thread : Gun shop recommendations - Christchurch

    Geoff Foster, he brought it after Adrian Mayberry’s accident to keep it going, had it for 5 years then sold it to go back flying.

    Liked On: 10-03-2022, 05:17 PM

11. 
    csmiffy liked post by Ryan_Songhurst On thread : Question for the forum gunsmiths.....

    Keep in mind also that you will need to completely ream the chamber again and flatten the face of the shank as the bergaras have a completely different setup with a recess on the face of the shank...

    Liked On: 09-03-2022, 12:19 PM

12. 
    csmiffy liked post by Marty Henry On thread : 54 cal sharps

    Well I finally got all the pieces together, managed to borrow a pedersoli mold and cast up some bullets. The sharps pattern "Christmas tree" is a bastard to get out of the mold due to the flange, I...

    Liked On: 09-03-2022, 09:21 AM

13. 
    csmiffy liked post by garyp On thread : Tragedy strikes!

    Got one here you can have free but its a bit rough

    Liked On: 07-03-2022, 05:39 PM

14. 
    csmiffy liked post by Yumastepside On thread : Show me your knives

    Pretty much a newy here, made few rough knives and axes from crosscut saw blades ( no where near the skill of you blokes ) but I usually modify some existing piece to get what I'm after and I do a...

    Liked On: 06-03-2022, 05:46 PM

15. 
    csmiffy liked post by Tahr On thread : 222 vs 22-250

    Its probably been covered, but most 22-250 are 1/14 twist which limits them in bullet weight. I had one and it wouldn't stabilise 60 grn. I shot the barrel out using 55 grn at 3,500fps on hares,...

    Liked On: 05-03-2022, 06:19 PM

Page 71 of 212 First ... 215758596061626364656667686970717273747576777879808182838485121171 ... Last

• Jump to page: