csmiffy
Member

3199 Likes

Page 75 of 214 First ... 256162636465666768697071727374757677787980818283848586878889125175 ... Last

• Jump to page:

1. 
   csmiffy liked post by grandpamac On thread : Rifle Obsolesence

   Greetings csmiffy, The .318 Westley Richards is a fascinating rifle with a distinguished history, just obscure enough but with components easily made or purhased. I believe that Eddie Herrick used...

   Liked On: 17-02-2022, 07:25 PM

2. 
   csmiffy liked post by 6x47 On thread : Winchester M69 revived

   My recently-deceased clubmate and friend John Hastie asked me to do this little project for his grandsons and I was more than happy to do, both because John was a great guy and he was super generous...

   Liked On: 17-02-2022, 09:03 AM

3. 
   csmiffy liked post by bunji On thread : Return of the 7 x 57 Mauser

   Sideshow You bastard, another Rabbit Hole to fall in to :P:thumbsup:

   Liked On: 15-02-2022, 05:26 PM

4. 
   csmiffy liked post by JohnDuxbury On thread : Return of the 7 x 57 Mauser

   It's better than the 7mm08 - it's got more capacity. It you load the 7mm Mauser to modern pressures it beats the 7mm08 with 140's and then doubles down with longer heavier bullets too. Due to the...

   Liked On: 15-02-2022, 05:21 PM

5. 
   csmiffy liked post by bunji On thread : Return of the 7 x 57 Mauser

   chainsaw Yep l have posted before that IMO the 7x64 is one of the most underrated hunting rounds going ,while l was in Africa another Guide had a French Built Mauser in 7 X64 & he hardly used it...

   Liked On: 14-02-2022, 06:55 PM

6. 
   csmiffy liked post by Husky1600 On thread : Return of the 7 x 57 Mauser

   Am I missing something.......I never knew the 7 x 57 had gone away.

   Liked On: 14-02-2022, 06:54 PM

7. 
   csmiffy liked post by Friwi On thread : BSA 3-lever triggers (Royal, Hunter, etc.)

   I know where a replacement extractor lives if you want one.

   Liked On: 13-02-2022, 08:31 AM

8. 
   csmiffy liked post by garyp On thread : BSA 3-lever triggers (Royal, Hunter, etc.)

   I have a few bits and pieces for older BSA rifles here, including a couple of triggers. Just PM me and let me know what you need. Also have a Majestic extractor.

   Liked On: 12-02-2022, 04:13 PM

9. 
   csmiffy liked post by gundoc On thread : BSA 3-lever triggers (Royal, Hunter, etc.)

   Thats a new trick! He must have tried to unscrew the barrel while the bolt was in place. Unforgiveable!

   Liked On: 12-02-2022, 04:12 PM

10. 
    csmiffy liked post by Moa Hunter On thread : BSA 3-lever triggers (Royal, Hunter, etc.)

    Well no wonder mine is giving grief. Someone has had a serious play in it's past and not assembled it correctly, with the trigger lever / pawl not positioned to pivot on the trigger lever pin. So...

    Liked On: 12-02-2022, 04:12 PM

11. 
    csmiffy liked post by craigc On thread : Showing Some Maturity

    Earlry in January we were out for a hunt and we spotted a couple of deer in the open, a spiker and one other that mooched off into the bush. Just as it disappeared I thought I saw a decent bit of...

    Liked On: 12-02-2022, 01:20 PM

12. 
    csmiffy liked post by Moa Hunter On thread : Dodgy recoil lug

    Great news. Nathans plasticine makes the blocking and damming easy. The drinking straws and threaded rod ( bolts with heads cut off) are a real key for when the metal work is lowered into the stock -...

    Liked On: 11-02-2022, 09:14 PM

13. 
    csmiffy liked post by gundoc On thread : BSA 3-lever triggers (Royal, Hunter, etc.)

    One of the triggers I cut my teeth on when I started professional gunsmithing more than 50 years ago was the 3-lever BSA trigger as found on the Royal, Viscount, Hunter, and early Majestic rifles,...

    Liked On: 11-02-2022, 09:13 PM

14. 
    csmiffy liked post by gundoc On thread : Dodgy recoil lug

    Yes, file it with a very slight forward taper and polish the surface with wet & dry backed by the file. Breaking the sharp edges also helps. Bed from the front edge of the mag well to about 50mm up...

    Liked On: 11-02-2022, 07:20 AM

15. 
    csmiffy liked post by gonetropo On thread : have you tried tumbling brass in rice?

    doesnt the pork and chicken affect the brass ?? :P

    Liked On: 09-02-2022, 06:51 PM

Page 75 of 214 First ... 256162636465666768697071727374757677787980818283848586878889125175 ... Last

• Jump to page: