Curtis27
Member

14 Likes

1. 
   Curtis27 liked post by JoshC On thread : Stags and Bucks 2023

   Old buck, broken leg. Not pretty. So decided to shoot him. Spotted him last night right on dark at 600, came back first thing this morning and he wasn’t far away the same location and confirmed the...

   Liked On: 06-05-2023, 07:25 PM

2. 
   Curtis27 liked post by canuck hunter On thread : 284 win vs 280ai

   What a waste of a target! All that space and you're only using one tiny bit.:thumbsup:

   Liked On: 20-02-2021, 12:33 PM

3. 
   Curtis27 liked post by Flyblown On thread : Fast twist 22-250 Load advice

   Your objective is a high case fill ratio, so rather a slower powder than a faster one. What I recommend is getting your hands on some of the bullets you want to try and then we can work out your...

   Liked On: 26-09-2020, 02:02 PM

4. 
   Curtis27 liked post by tetawa On thread : Barrel Fluting - existing barrel

   One thing a warranty gunsmith told me, once you flute anything the manufacturers warranty goes out the door.

   Liked On: 20-04-2020, 07:34 PM

5. 
   Curtis27 liked post by grandpamac On thread : 22-250 Ackley Improved Load info

   Greetings again Curtis27, Nosler has data for the 22-250 AI in its online data but the only ADI powder listed is Varget (AR2208). They also list net case capacities for each projectile. The increase...

   Liked On: 17-03-2020, 10:11 AM

6. 
   Curtis27 liked post by grandpamac On thread : 22-250 Ackley Improved Load info

   Greetings Curtis27, There are some simple ways to calculate what should be possible but you need to know the net volume of the parent and improved cases. Obviously the improved case needs to be fire...

   Liked On: 17-03-2020, 10:11 AM

7. 
   Curtis27 liked post by reynard On thread : Norma 6.5 Creedmoor brass Capacity?

   52.5g H2O with fired cases through a Sako 85

   Liked On: 09-03-2020, 10:14 AM

8. 
   Curtis27 liked post by gonetropo On thread : Anyone built a mini jetboat? 3m?

   stick a rotary in it

   Liked On: 29-01-2020, 10:16 AM

9. 
   Curtis27 liked post by WillB On thread : Powder for 22-250

   Don’t worry not my first rodeo 😃

   Liked On: 18-01-2020, 09:44 PM

10. 
    Curtis27 liked post by 308mate On thread : Gun Porn, show off your new toys

    Marlin 336 Dark 30-30 lever action, repurposed VX-6 1-6 CDS, Leupold QD rings and repurposed Oceania Defence can and cyclone brake which is shared with my Tikka .308. I'll be working up a load...

    Liked On: 28-09-2019, 09:47 AM

11. 
    Curtis27 liked post by Ryan_Songhurst On thread : Gun Porn, show off your new toys

    My "Cheap build with a simple point and shoot scope" has gotten a little bit out of hand. Bergara B14 Extreme in a Manners EH8, Talleys and Swaro Z5, Javelin bipod. Shoots the good old blue box stuff...

    Liked On: 25-09-2019, 08:21 PM

12. 
    Curtis27 liked post by Max Headroom On thread : Beams scales vs automatic powder dispencers

    I have a Lyman gen 6. One of the cons that wasn't immediately obvious was that the scale will not settle down and properly zero if there's something electrical nearby. By that, I mean I had a...

    Liked On: 21-07-2019, 10:24 AM

13. 
    Curtis27 liked post by craigc On thread : Gun Porn, show off your new toys

    A 300 RUM; all pretty much standard apart from the stug stock. Not quite as fast as the one above. 210 Bergers doing 2965 shot the best. 115296

    Liked On: 13-07-2019, 10:34 PM

14. 
    Curtis27 liked post by mcche171 On thread : Bushpig rifle build

    This is my new 308. T3x cut to 16", cerakoted, fluted bolt, fluted barrel, A tec 150 hertz suppressor topped with a Z3. Shoots the Hornady factory 168 into 0.7" on a windy night. Cant complain....

    Liked On: 05-06-2019, 12:49 PM