Be the first...get on with & let us know [emoji106] Sent from my SM-A530F using Tapatalk
Liked On: 10-09-2018, 07:16 PM
argghhhhh! scollies!! Hanging out, was supposed to go for a hunt Saturday but the sea was well up and viz was 200mm :D
Liked On: 09-09-2018, 08:41 AM
Don't be shy to give the 165 Nossler BT,s a whirl
Liked On: 09-09-2018, 08:39 AM
Fuck all but it looks gangsta https://www.gunworks.co.nz/shop/item/bolt-fluting
Liked On: 07-09-2018, 06:48 PM
As cool as fluted bolts looks, I don’t like the idea of more dirt leaves, sticks and crap getting into the action, magazines and trigger from fluted bolts. I have had two trips where the Sako trigger...
Liked On: 07-09-2018, 06:48 PM
Plus another one for the Speer 130 grain HP. They just work.
Liked On: 06-09-2018, 07:19 PM
All shooting is good fun, but it can become obsessive. 94259
Liked On: 02-09-2018, 11:56 AM
I was casting yesterday too Danny ;) 94261
Liked On: 02-09-2018, 11:50 AM
My load in my ruger77/44 is 22g of 2205 240g xtp 1.6col ,easily shoot 1in group @ 50m and kills really well with minimal meat damage.i would shoot out to 100m with confidence with it.
Liked On: 02-09-2018, 09:55 AM
Probably more like end nov for pannies off the beach here....the odd bigger one does get caught earlier but pretty hit and miss.
Liked On: 02-09-2018, 09:33 AM
Thank you all for you contribution to this thread. I have a new batch of 2209 to pick up on monday to do some load development on a friends .260 Rem so will try a few more loads in mine to see if...
Liked On: 01-09-2018, 10:04 PM
42nd traverse would be a good one. Sent from my TA-1024 using Tapatalk
Liked On: 30-08-2018, 10:24 PM
Its interesting to me to hear about others experience with ADI 2209.. only a very light load of it shot remotely well ( MOA or better) in my rifle. I also favoured the 2208 over it as I knew it not...
Liked On: 30-08-2018, 07:59 PM
20 rounds or less I would put 1 to 2 oiled patches thru the barrel and store it. But if more then 20 or so I would do a light clean and after around 400-500 rounds would give gun a deep clean.
Liked On: 30-08-2018, 07:50 PM
If by stamped brass you are referring to extractor marks it really depends on severity and how you go about prepping that brass for the new chamber. Pressure high enough to give you that kind of...
Liked On: 30-08-2018, 04:43 PM